While most new Oxnard Garage Door are painted

Any dust or dirt that has accumulated on a door should be removed. Begin with a broom to remove loose accumulations. Follow by rinsing with a hose and if necessary scrubbing using a brush designed for car washing dipped in soapy water. Rinse the door thoroughly and allow a few days to pass so that it is thoroughly dry before painting.

A steel brush can be useful for dislodging any peeling or loose paint. If peeling paint is not addressed it will continue to peel and lift the new coat off with the old. Pressure washers can be used to carefully remove lose paint as well as well as dust and dirt. The surface should be lightly sanded all over to allow paint to stick.

Any rust on the surface will need to be removed before attempting to paint. The steel brush and sand paper are useful for this job. Rust that remains on the metal can bleed through any new paint while also continuing to destroy the metal underneath.

Prime the material using a good quality primer. Be sure to choose a primer that is appropriate for the materials used to construct the unit. This ensures paint adheres correctly.

Select a quality exterior grade paint to cover the surface of the door. If more than one coat is needed, it is important to follow the manufacturer's directions for the second coat. It may be necessary to open the door a small amount so that tops and bottoms of panels can be painted as they separate on the bend of the track. Allow to dry before moving the door further.

While many homeowners choose to leave their garage doors Oxnard with the finish provided by the manufacturer, it is possible to paint it almost any color. A few preparatory steps will ensure that the new coat of paint remains looking good for several years in the future.