The use of pipe brush_faq

Anhui Meixin Brush Factory will introduce the use of pipe coating pipe brushes to everyone. First, introduce the application of pipe brush products: one of the problems of pipeline engineering is to pre-treat the pipe and remove the coating on the pipe surface to prepare for the subsequent welding process. Prepare. The innovative technology of pipe end coating cleaning brush has made a breakthrough in the removal of pipe coatings, and this technology is leading domestically. The newly developed brush system can quickly and effectively remove the coating material used for corrosion protection on the outer surface of the pipe, that is, the so-called epoxy primer polyethylene coating (polyethylene PE, polypropylene PPN and epoxy resin). The characteristics of the pipe brush system: 1. The pipe end coating cleaning brush system is used. The three processes are completed at the same time. At the same time, the pipe end is cleaned, the coating on the pipe is removed, and the angle of the coating is polished; 2. It is used for brushing. The rubber-coated brushes at both ends can prevent the steel wire from breaking, so that the machined surface does not have any grooves. If necessary, coolant can be used to flow out through the brush to avoid clogging of the brush. Advantages of the pipe coating cleaning brush system: The pipe brush system has a long service life and a short processing time, which reduces the processing cost to a minimum. It has a great time and cost advantage and meets the needs of customers. Welcome to www.mxbrushmachinery.com