The maintenance content of the tufting machine equipment generally includes the following points

The position of the hair transplanter generally appears at the horizontal elbow or tapered tube, especially the elbow where the horizontal section and the vertical tube are connected. To deal with the blocked pipe, first carry out the reverse pump dredging, and other personnel shall hit the blocked pipe position with a hammer. If it is invalid to remove the blocked pipe, close the hydraulic gate valve first. After the pressure is relieved, remove the concrete in the blocked pipe, connect the pipeline, open the hydraulic gate valve and continue pumping. It usually appears in the pipe near the exit end of the tufting machine, especially at the elbow where the horizontal section and the vertical pipe are connected. Treatment method: Close the hydraulic gate valves at the vertical and horizontal pipes and replace the pipes. Preventive measures: Regularly use an infrared thickness gauge to detect the thickness of the horizontal section and the vertical initial section of the conveying pipe, and replace it if the thickness is less than 4mm. Different types of wire ropes should be used for components of different weights. Small ropes are forbidden to lift large objects. At the same time, a regular inspection system of wire ropes and a visual inspection system before each hoisting should be established. The hair planting machine should pay attention to the wire ropes inspected during regular inspections. Marking, such as marking the qualified wire rope in blue during the first inspection, and marking the qualified wire rope in the second inspection in green, etc., for unqualified wire ropes such as loose strands, broken strands, exposed cores, and burrs. The safety range and other wire ropes are marked with red and are forced to be scrapped. Foshan Taifenglai Hair Planting Machine Factory www.gd-tfl.com The maintenance content of hair planting machine equipment generally includes daily maintenance, regular maintenance, regular inspection and precision inspection, equipment lubrication And cooling system maintenance is also an important part of equipment maintenance. The daily maintenance of equipment is the basic work of equipment maintenance and must be institutionalized and standardized. For the regular maintenance of equipment, work quotas and material consumption quotas should be formulated and assessed according to the quotas. The regular maintenance of equipment should be included in the assessment content of the workshop contract responsibility system.