The maintenance content of hair planting machine equipment generally includes the following points

The parts of the tufting machine generally appear at the bend or cone of the horizontal section, especially at the bend where the horizontal section connects to the vertical pipe. The way to deal with the blocked pipe is to unblock the reverse pump first, and then other personnel beat the blocked pipe with a hammer. If it is ineffective to eliminate the blocked pipe, close the hydraulic gate valve first, and after the pressure is released, remove the concrete in the blocked pipe, connect the pipe, open the hydraulic gate valve and continue pumping.

It generally appears in the pipe near the outlet of the tufting machine, especially at the bend where the horizontal section meets the vertical pipe. Solution: Close the hydraulic gate valves at the vertical and horizontal pipes and replace the pipes. Preventive measures: Regularly use an infrared thickness gauge to detect the thickness of the horizontal section and the vertical initial section of the delivery pipe, and replace it if the thickness is less than 4mm.

Different types of steel wire ropes should be used for components of different weights. It is forbidden to hang large objects with small ropes. At the same time, establish a regular inspection system for steel wire ropes and a visual inspection inspection system before each hoisting. Marking, such as marking the qualified steel wire ropes in blue in the first inspection, marking the steel wire ropes passing the second inspection in green, etc., marking the unqualified steel wire ropes such as loose strands, broken strands, exposed cores, and burrs exceeding The steel wire ropes in the safety range are marked in red and are forcibly scrapped. Foshan MX brushmachinery hair planting machine factory www.mxbrushmachinery.com

The maintenance content of tufting machine equipment generally includes daily maintenance, regular maintenance, regular inspection and precision inspection. Equipment lubrication and cooling system maintenance are also an important part of equipment maintenance. The daily maintenance of equipment is the basic work of equipment maintenance, which must be institutionalized and standardized. For the regular maintenance of equipment, work quotas and material consumption quotas should be formulated, and assessments should be carried out according to the quotas. Regular maintenance of equipment should be included in the assessment content of the workshop contract responsibility system.