Teach you to distinguish the four types of brush roller_FAQ

Brush rollers can always be seen in the food processing industry, metal processing industry, polishing and cleaning industry, textile machinery and other industries. Don't get me wrong, although they are all brush rollers, their production processes are different. Today we will enumerate several common production methods. 1. Flocking method: Flocking is a traditional production method with a short processing cycle. It is enough to evenly plant the brush filaments on the perforated roller through the tufting machine. 2. Winding type: clamp the brush wire on the metal strip, and then wind it on the roller by winding. This is a method introduced from abroad, and the abrasive wire material brush roller is mainly produced in this way. 3. Nylon sleeve; the manufacturing process of this method is simple, and the material requirements of this method are very high, and it is the main production method of high temperature resistant nylon filament brush roller. 4. Aluminum alloy brush roller; this is a new method. Different lengths can be customized according to needs. The roller body is spliced u200bu200bby aluminum alloy cylinders. The high-strength aluminum alloy substrate can make the density of flocking higher, and the roller body can achieve accurate dynamic balance verification. However, this kind of brush roller also has a shortcoming, it is not suitable for using metal wire as the wire brush material, and the requirements for the operation technology of the workers are also high.