Reasonable methods should be used to clean the brush roller_common problem

In industrial manufacturing, the normal operation of the machine is the fundamental guarantee for production. When the machine is running, all kinds of rubbish will inevitably appear. At this time, all kinds of debris must be cleaned with a brush to make the production proceed in an orderly manner. The brush roller is a kind of technical product that uses brushes. . Anhui Meixin Brush Manufacturing Introduction There are many types of brush rollers, and its brush filaments are composed of different materials to adapt to different machines. For example: In the glass industry, the brush roller used for glass scrubbing needs to be light and soft, so use nylon as the brush filament, and add a sponge to it, because the sponge can absorb water, so that the glass products can be wiped smoothly. new. But after a long time, the brush roller will become dirty, how to clean it to increase its life? First, rinse it with warm water, and then dry it with a dry towel. Do not wipe it against its hair when you wipe it again, otherwise it will easily fall off. Finally, put it in a ventilated place to dry and don’t get it. Exposure to the sun makes it easy to shed hair. In the steel industry, the material of the brush roller used to clean the steel plate must have hardness and corrosion resistance. Therefore, a material containing silicon carbide is usually added to nylon to make the texture harder. It can also resist corrosion. How to clean and protect a brush roller like this? Rinse with clean water first, because there will be a lot of wire foam on the brush roller, you can add an appropriate amount of cleaning agent when rinsing with water, so that you can wash off the wire foam on it, and then gently scrub with a small brush. Wipe it with a dry towel and dry it in a ventilated place. The brush roller will be as clean as new, which also increases its lifespan. Welcome to www.mxbrushmachinery.com