Products

Precautions for cleaning industrial brush roller_common problem

by：MX machinery 2022-04-08

In the process of maintenance and cleaning of industrial brushes, the brush must be cleaned in accordance with the correct cleaning method. In the cleaning process, the brush must be cleaned along the bristles. It cannot be cleaned in the reverse direction. Reverse cleaning will cause hair. The hair on the brush falls off to varying degrees. After cleaning, all the water inside the brush needs to be squeezed out. It should be noted that the squeeze-type drainage method cannot be carried out on the bristles of the brush, which will loosen the surface of the brush, which is not conducive to the future brush. In severe cases, the hair on the brush will fall off, which will further damage the industrial brush. The correct way to squeeze the cleaned industrial brush is to use a paper towel or a sanitary napkin to continuously dip the brush into the brush. When the moisture is almost dipped, the hair on the brush should be continuously squeezed through a paper towel or sanitary napkin to expel the moisture from the hair. Repeated work to make sure that the moisture is drained out. After the water in the brush is drained, the brush head of the industrial brush should be aired down to further drain the water in the brush. It should be noted here that when drying the brush, it must be placed in a cool and ventilated place for drying. Do not expose the brush to the sun, because the hair of the brush may be affected by the high temperature of the sun. In the same way, industrial brushes cannot be baked with dryers, nor can they be dried with ordinary hair dryers. Welcome to www.mxbrushmachinery.com