Introduction of inner-wound nylon wire spring brush_FAQ

The inner-wound spring brush is a kind of winding brush with steel wire nylon wire in the steel belt. It is mainly used for polishing and cleaning wire pipe fittings and other items. The material is generally 0.1-0.3mm steel wire stainless steel wire and high-quality nylon wear-resistant brush wire abrasive wire. Inner-winding spring brushes generally have a long production cycle and need to open a mold. The specifications are generally limited. Our factory can produce inner-winding spring brushes with a diameter of 20-80mm, and the inner hole can be as small as 0.5mm. Choose a high-quality spring brush to choose a Meixin brush! 13956497721 Dali brush spring brush (bristle roller): 1. The spring brush is to embed the brush wire in the galvanized iron or stainless steel bar and wind it into the shape of a spring by a machine to form a new variety of brush roller. This technology is a new method of introducing foreign brush rollers. 2. The spring brush is divided into inner winding spring brush and outer winding spring brush in appearance as shown in the figure below. 3. The spring brush roller is used on a seamless round shaft to maintain a good density with this winding method. Spot welding on the round shaft to form today's spring brush roller with high density of brush filaments and not easy to lose filaments (also called Winding brush roller). Welcome to www.mxbrushmachinery.com