Installation and removal of snow brushes

Installation and removal of snow removal brush machine factory When installing snow removal brush machine factory, pay attention to the symptoms of the vehicle, and drive the vehicle so that the quick connection frame at the front end of the car is aligned with the snow shovel connection frame, which can connect the hydraulic unit of the snow shovel and the vehicle 24v power supply. Turn on, connect the coupling frame of the snow shovel to the quick-connect frame of the car, and fix the snow shovel and the quick-connect frame with a pin. After the snow removal brush is installed, the left and right deflection cylinders of the snow shovel can be adjusted to make the snow removal brush form a fixed angle with the vehicle's forward direction, so as to facilitate the snow removal to the roadside. Snow-removing brush Adjustment of grounding width of snow-removing roller Raise the snow-removing roller, put away the storage legs at the front end, and put down the roller brush. Measure the width of the cleaning marks on the ground to see if it is within the range of 50-100mm, the grounding width is large, the brushing time is short, and the cleaning degree is good, and vice versa. The adjustment method is to adjust the length of the tie rod, the length of the tie rod is long, the grounding width increases, and vice versa. Storage of snow brushes After snow removal in this year, the equipment should be cleaned and cleaned, and all lubricated parts should be lubricated with grease, the sliding parts should be filled with lubricant to prevent rust, and the front legs of the snow brush should be put down. The wire should not be in contact with the ground, so as to avoid the deformation of the brush wire after long-term storage, which will affect the use effect. The storage environment should be ventilated and dry, and avoid direct sunlight.

The increasing consumption demand in key segments such as About MEIXIN Brush Machinery Factory, About MEIXIN Brush Machinery Factory and About MEIXIN Brush Machinery Factory have been driving the sales of and its derivatives worldwide.

No more need to worry about the condition of your About MEIXIN Brush Machinery Factory with , a BRUSH MAKING MACHINE FACTORY that helps in making your About MEIXIN Brush Machinery Factory look About MEIXIN Brush Machinery Factory like never before. Visit MEIXIN BRUSH MAKING MACHINE FACTORY to know more.

While About MEIXIN Brush Machinery Factory, About MEIXIN Brush Machinery Factory BRUSH MAKING MACHINE FACTORY can help achieve high accuracy._x000D_