How to maintain the automatic computer hair planting machine_Latest News

How to maintain the automatic computer hair planting machine

The fully automatic computerized tufting machine is more convenient to use, but many people don't know how to maintain it. The following is a simple list of nine points that we usually pay attention to:

1) The operator must often add lubricating oil to the various moving parts of the tufting machine to reduce the wear and tear between the machines.

2) The operator should regularly check whether the screws are loose, and if so, they must be locked in time.

3) Keep the guide rails and screw rods clean at all times to avoid debris adhering to the guide rails or screw rods, which will affect the accuracy of machine positioning.

4) Ensure that the electric box works in a ventilated environment, avoid a humid or high temperature environment, and prevent the electric box from violent vibration.

5) The electrical box cannot work in an environment with strong electromagnetic fields, otherwise uncontrolled situations may occur.

6) The input power wiring must be correct (red, blue, and yellow wires are respectively connected to 380V three-phase wires, green wires are connected to neutral wires, and yellow-green interphase wires are ground wires). Pin numbers: 1, 2, 3 are 380V phase wires, 4 Zero wire, 5 ground wire. working voltage

Stable, must remain at AC380±10V, because if you use too high a voltage, it may cause electronic components to burn out.

7) It is forbidden to hit the touch screen with hard objects, which will cause the sensitivity of the screen to decrease, and even hit the glass screen in severe cases.

8) Do not pull the cable too hard.

9) There is high voltage in the electrical box. When a fault occurs, non-professionals should not disassemble it to prevent electric shock or damage to system data.