Products

How to maintain brush making machinery and equipment-Company News

by：MX machinery 2022-10-25

How to protect brush-making machinery and equipment (1) The operator should often add lubricating oil to the moving parts of the hair planting machine to reduce mechanical wear. (2) Regularly check whether the screws are loose, and lock them in time. (3) Keep the guide rails and screw rods clean to avoid debris from adhering to the guide rails or screw rods, which will affect the accuracy of job positioning. (4) Ensure that the electric box is operated in a ventilated environment, avoid humid or high temperature environments, and avoid violent vibration of the electric box. (5) The electric box cannot be operated in the environment of strong electromagnetic field, otherwise it may appear uncontrolled. (6) The wiring of the input power supply should be correct (the red, blue and yellow wires are connected to the 380V three-phase wire respectively, the green wire is connected to the neutral wire, and the yellow-green phase-to-phase wire is connected to the ground wire). 4 neutral, 5 ground. The operating voltage should be stable, and insist on AC380±10V. Excessive voltage may cause the electronic components to be burned. (7) It is forbidden to hit the touch screen with hard objects, otherwise it will cause the sensitivity to drop and even break the glass screen. (8) Do not pull the cable too hard. The above content comes from brush-making machinery manufacturers, please indicate when reprinting. Previous: Reasons for defective products caused by hair planting machinesNext: Common faults and solutions of brush-making equipment

Custom message