High-speed brush polishing machine_FAQ1

The high-speed brush polishing machine is dedicated to ground polishing, and its structure is the same as that of the floor polishing machine. It rotates at high speed and uses a brush plate to rub the ground softly to achieve a polishing effect. It is suitable for polishing various flat and hard surfaces such as marble, granite, and wooden floors. Our factory mainly produces special-shaped brushes for industrial machinery, brush rollers, brush trays, brush belts, stainless steel spring coiled brushes, rubber rollers, and sponge suction rollers. It is widely used in industrial machinery cleaning, polishing, dust removal, rust removal, grinding, cleaning, gluing and conveying. The main applicable industries are: glass industry, leather industry, footwear industry, textile printing and dyeing industry, wood industry, furniture industry, electronics (computer) production industry, printing industry, watch industry, galvanized sheet production industry, food and beverage industry, tobacco Cleaning and cleaning brushes for various special industries such as industrial, carton industry, printing industry, lighting appliance cup washing industry, military industry gun washing, highway cleaning and so on. Based on the tenet of striving for survival by quality and seeking efficiency by products, our factory wholeheartedly serves users. Welcome to log in; contact Xu Shengli at www.mxbrushmachinery.com; 1. Operation rules①, dry wipe to remove land before polishing Floor surface waste, and wet wipe to remove sand and stone debris. ② Check whether the disc brush of the polishing machine is clean, if it is too dirty, replace it with a new one. ③. Check whether the controller for adjusting the speed of the machine is in the position of the normal machine speed. ④. When the power is turned on, the operation should start from the place closest to the power socket, the walking route is a straight line, and the polished ground at the back should overlap the polished ground at the front. 2. Matters needing attention ① Don't drive the machine too fast during work to avoid collision. ② Do not use flammable liquids to wash the floor, or operate the machine in explosive air. ③. When operating the machine, do not lift the operating lever, which will cause the machine to lose control. ④ The machine must be placed indoors, not exposed to rain and snow, and never spray any liquid on the top of the machine. ⑤ Don't press anything on the machine, because it has a precise balance. When the operation mark needs to be moved, all the wires must be moved. ⑥. The bottom line must be connected to the switch box and the motor. Connecting measures will cause electric shock and shock. 3. Maintenance work ① After each use, wipe the surface of the machine with a clean cloth. When not in use, place an unused polishing pad under the drive plate and disconnect the machine. ②. Check whether the air vent on the motor cover is unblocked. If there is a lot of dust accumulation, you must remove the motor cover and use a vacuum cleaner to remove all the dust.