Hair planting machine_high-speed hair planting machine_brush making equipment18

MX machinery https://www.mxbrushmachinery.com/

Compared with the old hair-planting machine, the computer hair-planting machine is very convenient and fast to use. However, many people do not know how to protect and maintain the hair-planting machine. Let me share with us some points on the protection and maintenance of the computer-based hair-planting machine. Things to keep in mind when:

1. It is necessary to keep the guide rails and screw rods clean for time to prevent debris from adhering to the guide rails or screw rods, which will then affect the accuracy of machine positioning.

2. It is necessary to ensure that the electric box is operated in a ventilated environment, prevent humid or high temperature environment, and prevent the electric box from shaking violently.

3. It is forbidden to hit the touch screen with hard objects, which will cause the sensitivity of the screen to decrease, and even the glass screen will be broken if it is severely hit.

4. It is forbidden to pull the cable too vigorously.

5. There is high voltage in the electric box. When there is a problem, non-technical personnel should not disassemble it to prevent electric shock or damage to the system data.

6. The operator needs to often add lubricating oil to the various moving parts of the hair planting machine to reduce the wear between the machines.

7. The operator should regularly check whether the screws are loose, and if they need to be locked in time.

8. The electric box cannot operate in the environment of strong electromagnetic field, otherwise it may appear uncontrolled.

9. The wiring of the input power supply should be correct (the red, blue and yellow wires are respectively connected to the 380V three-phase wire, the green wire is connected to the neutral wire, and the yellow-green phase-to-phase wire is connected to the ground wire). Neutral wire, 5 ground wire. The working voltage should be stable and kept at AC380±10V, because if the voltage is too high, it may cause the electronic components to burn out.

MX machinery https://www.mxbrushmachinery.com/

Brush-making equipment Hair-planting machines are available in many brush-making factories. There are many processing methods, such as mechanical/semi-automatic/full-automatic. The editor of the hair planting machine will introduce to us several processing methods about the hair planting machine.

Brush making equipment hair planting machine

mechanical

It means to process the product continuously, without stopping in the middle, unless you press the 'Abort' button, and only when more than 2 fixtures are placed, the cyclic processing of the product can be ended. Fully automatic processing can improve the production efficiency. When the product on the first fixture is processed and the product on the next fixture is processed, the product on the first fixture can be replaced, and the product on the next fixture can be replaced when the product is processed. The product on each fixture ends the reciprocating processing. If only one fixture is placed, only semi-automatic machining mode can be used. In the standby state, press the number key '1' on the panel to enter the fully automatic working method. When the protection occurs, the whole machine will stop working. If there is an empty space, press the 'Preliminary' key to process, otherwise, in the original processed hole position, press the Preliminary key to process a heavy hole phenomenon, which may damage the needle. Be careful during operation, and you should also pay attention to semi-automatic machining.

Semi-automatic

Press the 'Preliminary' button once to process once. After the product is processed, the machine head stops at a high position, and the work reaches the starting point. To replace the product, press the 'Preliminary' key again, work to the first hole position, and process it again. You can also process from the Nth hole to the final hole. N can be set. After entering the hole number through the keyboard, press the Press the 'Preliminary' key to process it, otherwise the needle will be damaged. When protection occurs, the treatment method is the same as that of automatic machining.

Fully automatic

After setting the data of the product, in the fully automatic test machine screen, press the 'up hole' or 'down hole' key to end the single-step hole alignment, you can check whether the orientation of the hole is wrong, if it is wrong, you can exit and enter Make corrections under the experience correction interface. After the preliminary work, the workbench will move continuously until a product program file is finished and the work is terminated, so that it can be checked whether the workbench is normal.