Extension and size of steel strip brush_faq1

Qianshan County Meixin Brush Factory specializes in the production of steel strip brushes and steel strip brushes. The extended product of the strip brush is that the brush strip is spirally wound on the processed steel shaft, and the two ends are welded and fixed. It is characterized by high density of bristles and does not fall off. The hollow spring brush can be made into a hollow spring brush according to the size, which can be installed and replaced by the customer, and the use cost is lower. The brush shaft can be made of 45# round steel, ordinary stainless steel and 304# stainless steel. According to different purposes, the brush can be made of sisal, wool, PP wire, steel wire, stainless steel wire, copper-plated wire, copper wire, abrasive wire, etc. Material. Base material: stainless steel, electrolytic plate, galvanized plate, low carbon steel plate Brush length: 20mm (shortest), 1000mm, 1200mm, 1500mm, 2000mm, 5000mm, 10000mm (longest), etc. Steel strip bottom thickness: minimum 2.5mm (shortest) Thin), 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 12mm (thickest) side height of steel strip: for example 3*3 (3mm thick*3mm side height) can also be used as 3*4 (3mm thick*4mm side Height), 5*5 (5mm thickness *5mm side height) can also be made as 5*5 (5mm thickness *7mm side height). It can be adjusted according to the requirements. Welcome to visit www.mxbrushmachinery.com