Escalator safety brush types, uses, specifications and materials introduction_FAQ

There are two types of escalator safety brushes: single-row and double-row. The production process is firstly drilling and planting wool on the rubber strip, and the second is a brush strip made of steel belt (aluminum alloy, iron sheet). The purpose of escalator safety brushes: used on escalators in major markets, shopping malls or subway entrances and exits, installed on both sides of the lower part of the escalator to prevent objects or shoe laces from being caught in the gap between the escalator steps and the skirt side panels Safety hazards. Escalator safety brush specifications and materials: the extension length of the bristles is generally about 50mm-52mm, and the thickness of the brush strips should be 5mm*5mm, 6mm*6mm or 7mm*7mm; the brush wire material is soft black Nylon wire (specially required to have anti-flame retardant nylon brush wire) is better, it does not damage the clothes, but also has a certain degree of elasticity, and the brush should be able to recover after the passenger's shoes are touched. The brush anti-pinch device is composed of a base and a brush. The base must have a good unit structure, which does not allow the possibility of danger, and can be easily removed. Its surface should be smooth, without sharp edges, and firm without breaking. An escalator equipped with a safety brush device allows passengers to enter and exit the escalator, and there are almost zero accidents of people caught in the gap on both sides. Therefore, it is necessary to install a safety brush on the escalator to ensure the safety of passengers. Welcome to the official website of Meixin Brush Factory; www.mxbrushmachinery.com