Meixin Comb Brush Machinery
A leader in this industry ,specializing in brush making machine line for more than 14 years
这里可以自定义设置
SPECIAL FEATURES
❶ With the 2 drilling and 1 tufting heads, M171 its used to produce wire wheel brush, jade brush. There with the photo attached.
❷ FMX fixture allows fast change over for a new brush tufted production. This machine with 3 grippers.
❸ Independent 3 axis motion, suitable for any wooden or plastic brush handles tufting.
❹ It can tuft the anchor wire, bristle, PP, PET, horse hair, and so on.
❺ Perfect design, wont be miss the holes and get high productivity.
❻ It's suitable for the customer who start to manufacture the hair brush, not only ess cost but also good return.
| Travel of x axis | 1000mm |
| Travel of y axis | 300mm |
| The swing of z axis | 360° |
| The swing of b axis | 120° |
| The height of A axis | 300mm |
| Voltage | 220v or 380v |
| Dia of holes | 5-7 holes/sec |
| Dia of fiber | 0.2 -1 mm |
| Fiber box | 2 colors |
| Filament outside holes | 30-50mm |
| Type of handle | Cylindrical shapen, with flat and curved surface |
| Productivity | 2000pcs/ 10 hours |
| Material of filament | Pp, nylon, wire, stainless steel, wire, bristles. |
| Plc size | 5.7inch (Chinese & English) 50-60HZ |
| Data input for tufting | Teach-mode or digits type |
| Transactio n mothed | Exw, fob, cif, cfr |
| Payment details | 40% prepay by t/t, 60% pay by t/t before shipment. |
| Delivery time | Within 45 days after receive the deposit |
| Warranty | Controller is one year, others part of machine engineer available to send to there to repair the machines. |
| Spare parts | Tufting needles: 5 pcs, hair mouth: 3 sets, cutter: 2 sets, pulling knife: 2 pcs, alloy: 2 pcs. |
1.
Delta inverter, Panasonic servo motor.
2.
Taiwan TBI ball screw guide way and Taiwan HIWIN.
3.
Schneider low voltage electrical appliances.
4.
Japan close with bearing.
5.
Germany SENLIMA brake motor.
6.
SHENZHEN ATECH controller
1.
It's provided with manual data input as well as teach in data input method.
2.
Auto or step operation.
3.
Speed of tufting is controlled by inverter for various speed adjustment.
4.
Test mode to test machine if functions properly.
5.
Editing features of , delete or copy.
6.
Normal working or positioning testing.
7.
Drilling and tufting excessive pressure alarm
8.
Production speed is adjustable.
Copyright © 2023 Meixin Comb Brush Machinery Co., Ltd. | All Rights Reserved 粤I CP备18042005号-4
Product Message