Conveyor belt cleaning brush roller and steel industry brush roller process introduction_FAQ

1. Conveyor belt cleaning brush roller technology introduction The conveyor belt often has debris that can be removed by the conveyor belt brush roller. The conveyor belt brush rollers generally have the same outer diameter, that is, the length of the bristles is the same, but in fact the conveyor belt In the process of use, it will usually be concave downward in the middle and slightly higher on both sides. In this way, when using conventional brush rollers, the cleaning on both sides is usually very good, but the intermediate effect is not very good. The curved design of the brush roller will make the brush roller and the conveyor belt more consistent. The curvature of the brush roller can be adjusted according to the conveyor belt. Matching, in order to achieve the use effect of ****. The curved brush roller just spends more time in the shearing process, and will not increase the customer's extra cost.　　 Two, introduction of brush roller technology in the iron and steel industry 　　 Brush rollers play a pivotal role in hot-dip galvanizing, pickling, color coating and other production lines of strips. The manufacturing processes of brush rollers in the iron and steel industry mainly include spiral winding, internal welding and assembly, and spiral bite brush assembly. The brush wire generally adopts a 0.5-diameter nylon curved wire or an abrasive nylon curved wire. As far as the life cycle is concerned, the bite-type brush roller occupies the dominant position. It is composed of a single-piece brush sleeve, key, brush roller shaft, and end plate as an integral brush roller assembly form. The nylon bristles are made into a single-piece brush cover. The single-piece brush cover is combined and pressed on the roller shaft of the brush roller. After being fixed by the key and the end plates at both ends, the outer circumference of the nylon bristles is turned integrally. It has the characteristics of simple structure, reasonable design and long service life, which can increase the number of single-piece brush sleeves installed on the effective length of the brush roller shaft by about 10%, thereby enabling high-density filling of bristles and improving cleaning quality. After the integral brush roller is assembled, the outer circle of the nylon brush roller is overall trimmed and polished to improve the balance of the brush roller and extend the service life. This article is from www.mxbrushmachinery.com