Brushes are widely used and meet a variety of needs_FAQ

The degree of industrialization in modern society is getting higher and higher, and there are many types and specifications of brushes, and their application range is extremely wide. It can be said that in modern industrial production, almost all walks of life will use the brush as an accessory tool. The main application scope of 　　 brushes is in four areas: dustproof, polishing, cleaning, grinding, and coating. 1. The main purpose of dust-removing brushes and dust-proof brushes is to be installed at the inlet and outlet of industrial equipment, assembly lines, doors and windows, etc., to prevent dust from entering through these gaps and polluting equipment and products. Therefore, the requirements for wire brushing are It has high elasticity and good lubrication on the surface of the brush wire. It has flame retardancy, abrasion resistance and antistatic function for special occasions. For example, the escalator safety brush belongs to the category of dust-proof brush, but its requirements are higher. 2. The polishing brush is mainly used to deburr and finely polish the surface of the thrown object. Therefore, the type and characteristics of the brush wire must be determined according to different requirements. If it is a steel plate with stronger hardness, the surface needs to be electroplated and polished. Yes, the most ideal brush wire should be bronze wire. If it is a general metal material for surface derusting and deburring, then steel wire with better hardness can be used. 3. The cleaning brush is the most commonly used industrial roller brush. It is generally used for the cleaning of fruits and vegetables in the deep processing of agricultural and sideline products and general cleaning and dust removal in the industry. The requirements for the brush wire should be good wear resistance and high elasticity. Anti-corrosion and aging, long-term operation is not easy to deform. If the brushing performance is not good, when the object is placed in a certain position for a long time, it will cause the brush roller to appear grooves, which will destroy the function of the roller brush. The strip brush roller is scrapped. 4. Abrasive brushes are used less frequently. General industrial grinding will be done directly with abrasive tools such as grinding wheels. These are not within the scope of industrial brushes, but those used for the textile industry sanding treatment should use silicon carbide-containing ones. For the abrasive wire brush roller, the mesh number (density) of the silicon carbide contained in the abrasive wire should be properly adjusted with the strength of the fabric to be ground and the effect to be ground. Welcome to www.mxbrushmachinery.com