Brush making equipment - automatic flat hair machine - flat hair flowering machine - high-speed hair planting machine manufacturer55

Accurate process operation: the reasonable use of flocking (fluff) pulp plays a crucial role in the flocking process. First, a certain amount of additives (1.5%-2%) or additives are added when the flocking (fluff) pulp is used. Mix and stir with 1:1 water, and then add it into the slurry and stir evenly. The prepared slurry must be used immediately and cannot be left for too long (within 8 hours), otherwise cross-linking will occur at abnormal temperature and affect the use. This is a matter of attention during operation. If the flocking pulp is too thick during printing, you can add appropriate amount of water to dilute it, which is helpful for benign operation. It is recommended to use 800 mesh (80 mesh) plate making, screen printing: pay attention to the time between the last printing of flocking (fleece) pulp and the flocking operation, there must be no gap of 1 minute, and the number of printings depends on the relevant fabric, time, etc. factor adjustment. The cloth is naturally dry and can be washed with normal water at 60°C after 24 hours. If the customer requires strict quality, it must be baked at 160 ° C for 10-60 seconds. Of course, the baking temperature and time also need to be adjusted according to the relevant fabric and requirements. The final process of fabric flocking is to clear the tail process. After using the wool suction machine to absorb the hair, the finished wool product is shipped by sticking the residual part of the fabric with adhesive tape. The operator should often add lubricating oil to the moving parts of the hair planting machine to reduce mechanical wear. Regularly check whether the screws are loose, and lock them in time. Keep the guide rails and screw rods clean to avoid sundries adhering to the guide rails or screw rods, which will affect the accuracy of work positioning. Ensure that the electrical box works in a ventilated environment, avoid humid or high temperature environments, and prevent the electrical box from vibrating violently.

https://www.mxbrushmachinery.com/