Brush making equipment - automatic flat hair machine - flat hair flowering machine - high-speed hair planting machine manufacturer

The voltage stabilizer outputs 200 volts AC to provide a 100 kV transformer, one end of the transformer is grounded, and the other end is connected to the screen inside the wooden box. Put the bucket containing the glue that has been mixed into the mixing bucket, then tighten the lid of the bucket, then connect the air source and the spray gun, then turn on the air source, and first let the electric fan in the mixing bucket stir the glue. average. Put the plastic parts that need to be flocked into the glue mold, then put them into the air extraction box, open the shotcrete box, spray a lot of glue on the glue parts, and then take the glue parts from the glue mold. Come out and put it on the pendant stick. Put the wooden stick into the hair planting box, step on the switch, connect the power supply, and make the screen absorb the fluff under the high voltage of static electricity. Then put the part that needs to be planted down and swing against the fluff, so that the fluff can reach evenly and fully absorb the glue for a period of time. Put the glued parts and wooden sticks into the furnace together, dry the glue and take out the wooden sticks from the furnace, then take out the glued parts from the wooden sticks and put them in place. After the glued parts are cooled to room temperature, Start cleaning the flocked surface. The transmission structure of the high-speed toothbrush hair planting machine consists of a main drive shaft and four servo drive shaft systems. The four servo axes are the horizontal X axis, the vertical Y axis, the flap Z axis and the molting U axis. The XY two-axis coordinates determine the position of the toothbrush hole, the Z axis plays the role of changing to the next toothbrush, and the U axis plays the role of changing the color of the toothbrush. When the spindle motor is running, the four electronically controlled servo axes follow the operation, and when the main shaft stops, the other four axes follow the stop. The rotational speed of the main shaft determines the speed of hair planting, and the four servo shafts respond to the request for a harmonious drive, otherwise there will be hair loss or uneven hair.