Brush making equipment - automatic flat hair machine - flat hair flowering machine - high-speed hair planting machine manufacturer41

The Lanbang number control brush equipment manufacturer has summarized the following points for your reference, and you can also contact us for supplements: 1. The operator must always add lubricating oil to each active part of the hair planting machine to reduce the wear between the machines. 2. The operator should regularly check whether the screws are softened, and if so, they should be tightened immediately. 3. Always keep the guide rail and screw sterilized to avoid sundries adhering to the guide rail or screw, which will affect the positioning accuracy of the machine. 4. Ensure that the electric box works in a ventilated environment, avoid dry or high temperature environment, and prevent the electric box from violent vibration. 5. The electric box cannot work under the strong electromagnetic field environment, otherwise it may be out of control. 6. The input power wiring is accurate (the red, green and yellow wires are respectively connected to the 380V three-phase wire, the green wire is connected to the neutral wire, and the Zheng and green wires are connected to the ground wire). Pin numbers: 1, 2, and 3 are 380V phase lines, 4 neutral lines, and 5 ground lines. The working voltage must be kept at AC380±10V to be stable, because the electronic components may burn out if high voltage is used. 7. It is forbidden to touch the touch screen with hard objects, which will reduce the sensitivity of the touch screen and even break the glass screen. 8. Do not pull the cable hard. 9. There is high voltage in the electric box. In case of failure, non-professionals should not disassemble it to prevent electric shock or damage to system data.

https://www.mxbrushmachinery.com/