When the filament is damaged during flocking or punching, its strength and durability are greatly affected, or the contact surface of the root of the filament is very sharp or rough, the resistance of the filament will also be reduced, and the service life will be shortened. Sometimes brush users use their own familiar processes to replace other processes, which will also result in poor quality, such as metal stamping
brush machine factory, because of the high density, the hardness of the brush surface is higher, the pressure during application is small, and there is a small amount of space at the root of the brush, which can be reduced. The impact force of the root, in the pneumatic machining, the service life will be obviously good at flocking processing brush machine factory. In order to save the cost of silk, some brush manufacturers have dense bristles per hole, or the density of brush holes is not enough, resulting in dense bristles on the brush roller, soft and weak bristle surface, low grinding efficiency, and users are unclear. Therefore, increase the back pressure or The speed is increased to improve the efficiency, resulting in the overloading of the brush wire, and the service life is greatly reduced. When pressing the U-shaped metal strip, special attention should be paid to whether the brush wire is smooth or not. If there is an interspersed inclination, the resistance of the reverse brush wire will increase greatly when the brush roller is running, and the wire will be easily broken, which will greatly reduce the life of the brush roller. When the length of the brush wire is too long, it is not the cutting surface of the brush wire that is working, but the side of the brush wire. What is more important is that the swinging amplitude of each wire is greatly increased. At 800-2500 revolutions per minute, the brush wire foundation The stress and fatigue coefficient increase exponentially, resulting in the broken wire of the abrasive brush and the deformation of the brush. There are two main cases: single bundle loose, partial hair removal. Single-bundle hair removal means that the stability of the hair planting is not good. It is mainly related to the size of the drill hole, planting, depth, and number of hairs. Generally, it can be detected by the tensile test of single-bundle hair. Part of the hair removal is actually mainly broken hair, mainly related to the brush. The balance of force and dynamics of the roller, the quality of brushing, and the quality of flocking are related. After careful inspection, the crux of the problem can be found.
https://www.mxbrushmachinery.com/
Using our MX machinery to differentiate our content, services and consumer products, we seek to develop the most creative, innovative and profitable entertainment experiences and related products in the world.
JIANGMEN MEIXIN COMB BRUSH MAKING MACHINE FACTORY, to be the world leader in products, services and solutions that enable and transform the way consumers and businesses gather, manage, distribute and communicate information.
We are professional in manufacturing BRUSH MAKING MACHINE FACTORY, and always emphasize the technology and quality during the producing procedure.
What JIANGMEN MEIXIN COMB BRUSH MAKING MACHINE FACTORY discovered was that innovation occurs when business models match up with one or more of the BRUSH MAKING MACHINE FACTORY where technological advances overlap with market needs, thus resulting in growth and transformation.
There are many advantages associated with .
