Brush classification and application range_FAQ

There are mainly the following four application areas: 1. Polishing brush: It is mainly used to deburr and finely polish the surface of the thrown object. Therefore, the type and characteristics of the brush wire must be determined according to different requirements, if it is stronger For high-degree steel plates, etc., the surface needs to be electroplated and polished. The ideal brush wire should be bronze wire. If it is a general metal material for surface rust and deburring treatment, then use a steel wire with better hardness; 2. Grinding brush ; Used less, general industrial grinding will be done directly with abrasive tools such as grinding wheels, these are not within the scope of industrial brushes, but for the textile industry to sanding, it is necessary to use abrasive wire brush rollers containing silicon carbide , The mesh number (density) of the silicon carbide contained in the abrasive filament should be adjusted appropriately with the strength of the fabric to be worn and the effect to be worn out. 3. Dust-removing brushes, dust-proof brushes; the main purpose is to install at the inlet and outlet of industrial equipment, assembly lines, doors and windows, etc., to prevent dust from entering through these gaps and polluting equipment and products. Therefore, the requirements for wire brushing are It has high elasticity and good lubrication on the surface of the brush wire. It has flame retardancy, abrasion resistance and antistatic function for special occasions. For example, the escalator safety brush belongs to the category of dust-proof brush, but its requirements are higher. 4. Cleaning brush; this is the most commonly used industrial roller brush. It is generally used for the cleaning of fruits and vegetables in the deep processing of agricultural and sideline products and general cleaning and dust removal in the industry. The requirements for the brush wire should have good wear resistance and high elasticity. It is also resistant to corrosion and aging, and it is not easy to be deformed for a long time. If the brushing performance is not good, when the object is placed in a certain position for a long time, the brush roller will appear grooves, which will damage the use function of the roller brush, and even the worst Cause the entire brush roller to be scrapped.