A detailed introduction to the parameter description of the snow blower brush_FAQ

The brushes for snow blowers are produced by AAA-level manufacturers, and the brushes for large snow blowers at home and abroad are matched! Welcome your call! 1. Power configuration The power configuration adopts the original China National Heavy Duty Truck HOWO-7 6X4 mid-top dump truck (National III), with an engine power ≥290 horsepower, equipped with steel wire tires and air conditioning. The winning bidder is responsible for handling the registration of vehicles (all costs shall be borne by the winning bidder). 2. Front snow sweeping brush 2.1 The width of the front snow sweeping brush is ≥3600?, the diameter of the snow sweeping brush is ≥800mm, and the speed of the snow sweeping brush is ≥260 rpm (with a certain load). 2.2 The bristles are made of polypropylene/elastic steel wire mixed material, which can be used normally for 2 snow seasons. 2.3 Bidders must bring a complete sample of bristles on the day of bid opening. 2.4 The bristles are resistant to abrasion, elasticity and bending, and do not damage the road surface. 2.5 Sweeping brushes should be equipped with left , Two hydraulic motors on the right, the hydraulic tubing that requires the original imported (world-renowned brand) ≥20Mpa2.6 sweeping must be imported (the world-renowned brand) 2.7 sweeping oil pipe joints must be imported (world-renowned brand) 2.8 sweeping The quick-change connector of the tubing must be imported from original packaging (a world-renowned brand). 2.9 If the sweeper has casters, it must be a pneumatic tire. 2.10 It can be deflected left and right, and the sweeping brush deflection angle ≥28°2.11 The front snow sweeper has a snow-blocking function to ensure The sweeping snow does not splash back and affect the driver’s sight 2.12 The sweeping brush seat is installed on the front of the vehicle 2.13 The sweeping brush can be quickly disassembled 2.14 The rising and falling of the sweeping brush is hydraulically controlled 2.15 The front snow sweeping brush must have a servo function on the road 3 .Front snow sweeping brush hydraulic control system 3.1 All control functions must be controlled by a controller, no separate switch, and fixed in the cab. The buttons and buttons are flexible and reliable, and easy to operate by the operator. 3.2 The control system must have functions such as an oil temperature alarm system, a liquid level alarm system, and an oil temperature display system. 3.3 The controller should be able to complete the lifting, lowering, left and right deflection and rotation of the mounted snow removal equipment, while also being able to control Lifting of large tanks of vehicles with dump function 3.4 The hydraulic pump installed in the engine power take-off part must be installed reasonably, which is convenient for inspection and repair, and has the necessary protective measures 3.5 The front snow sweeping brush and the lifting of the chassis truck tip only need to pass through one The hydraulic workstation can meet all normal work and power requirements. 3.6 The hydraulic workstation must be equipped with effective filtering, heating, and heat dissipation devices, with a cleaning window, and the heat dissipation device can be automatically adjusted to ensure normal oil circuits and reliable operation. 3.7 Other cab tops need to add two work lights for easy disassembly and assembly to ensure night operations 3.8 The working power of the hydraulic system matches the vehicle. Welcome to log in; www.mxbrushmachinery.com