Wire Wheel Product Introduction_FAQ

Wire Wheel-Wire Wheel The wire wheel is an abrasive product in which steel wires of different specifications and materials with higher tensile strength are distributed in a radial state and rolled into various shapes. Wire wheel use Wire wheel products can be used in various engineering cranes, metallurgical and mining equipment, oil field derricks, port and railway loading and unloading, forestry machinery, power equipment, aviation and marine, land transportation, engineering rescue, salvage of sunken ships, lifting of factories and mining enterprises , Hoisting, traction rigging. Classification of steel wire wheels: According to different types of use, shapes and materials, steel wire wheels can be divided into: copper-plated steel wire paint wheel, copper-plated steel wire paint brush, stainless steel wire paint remover brush, stainless steel wire paint wheel, stainless steel wire paint wheel Wheel, stainless steel wire paint removal, pipe brush, pipe brush, pipe wheel brush, deburring grinding wheel, deburring wheel, twisted wire dish-shaped wire wheel, twisted wire flat wire brush, twisted wire bowl-shaped wire wheel, in Anhui The main supplier of Anhui Meixin Brush Factory is the storage of wire wheels: 1. Handling and storage: 1. The wire wheels must be handled with care. 2. The steel wire wheels should be stored to prevent moisture. They should be stacked flat on a wooden pallet or wooden frame, and the stack height should not exceed 1.2 meters. 3. The packaging of the steel wire wheel is only allowed to be opened before use, and it must be sealed and stored if it is not used up at a time. 2. Installation of the wire wheel 1. When loading and unloading the wire wheel, the power or air source of the main engine must be cut off. 2. The protective cover is installed firmly to prevent the broken metal from splashing on the operator or others. 3. Put the cam flange on the power shaft and sleeve it into the wire wheel and tighten the nut with a special tool, and pay attention that the cam flange faces the wire wheel and the tightening direction of the nut. 3. The use of steel wire wheels 1. Please use the specified safety cover to work, wear protective work clothes with safety cover and protective gloves. 2. Check whether the main machine (air-driven, electric) solid, the hand-held grinder and the wire wheel type matched with it are consistent. 3. Please use the wire wheel within the allowable safety factor linear speed range. 4. When installing a new steel wire wheel, spin it in the air for 3 minutes in order to throw away the remaining broken wire around the product. In use, it should not be impacted excessively, and the service life should be kept longer to avoid danger. Fourth, the quality inspection technical standards of steel wire wheels 1. The appearance is flat and the steel wires are evenly distributed, and there is no partial wire shortage. 2. 100*10*20 cup-shaped steel wire wheel with 3mm thick A3 steel material in the center. 3. The maximum working line speed is 60 m/s, the working speed is 11465 rpm, and the test of the high-speed rotary machine is 1.5 times. 4. The non-concentricity of the wire wheel is ≤0.40mm. 5. Splint: Material 08F board 1.2mm thickness. 6. The steel wire of the steel wire wheel: specification? 0.3~0.4mm mixed ratio production. Material: mechanical properties conform to YB248-64Ⅱɑ group standard,? 0.3~0.4mm. The tensile strength of steel wire is (эb)u003d225~270kg/mm2; 0.4 steel wire is (эb)u003d220~265kg/mm2. The breaking force of the wire wheel knotting tensile test is 50% of the breaking force without knotting. For details, please visit www.mxbrushmachinery.com Phone