What is the operating procedure of the hair planting machine?

The operation process of the tufting machine: 1. The voltage stabilizer outputs 200 volts AC and supplies it to a 100 kv transformer. One end of the transformer is grounded, and the other end is connected to the screen inside the wooden box. 2. Put the bucket filled with the mixed glue into the mixing bucket, tighten the lid of the bucket, connect the air source and the spray gun, then turn on the air source, and shill the electric fan blade in the mixing bucket to put the glue Stir well. 3. Put the rubber parts that need to be wool-planted into the glue mold, then put them into the suction box, open the spray box, spray a lot of glue on the glue parts, and then put the glue parts out of the glue mold Take it out and put it on the pendant wooden stick. 4. Put the wooden stick into the hair planting box, step on the switch, and connect the power supply, so that the screen will absorb the fluff under the high voltage of static electricity. Then turn the part that needs to be planted downwards, and keep swinging against the fluff, so that the fluff inside can be evened out in a short period of time, and the glue parts can be fully absorbed. 5. Put the wool-planted plastic parts and wooden sticks into the furnace, and dry the glue. 6. Take out the wooden stick from the furnace, and then take out the plastic part from the wooden stick and put it away. After the plastic part cools down to normal temperature, start to clean the surface of the flocking. For more information about tufting machines, toothbrush tufting machines, and high-speed toothbrush tufting machines, please pay attention to the update of our website