Meixin Comb Brush Machinery
A leader in this industry ,specializing in brush making machine line for more than 14 years.
Brush-making equipment The tufting machine has equipment in many brush factories. There are many kinds of processing methods, such as mechanical/semi-automatic/automatic. The editor of today's high-speed broom machine will introduce us to several processing methods about the tufting machine.
Mechanical
is the continuous processing of products, the center does not stop, unless you press the 'continuous' button, you only need to place more than 2 fixtures, the cycle processing of the product can be ended. Fully automatic processing can advance the output power. When the product on the first fixture on the list is processed and the product on the second fixture is processed, the product on the first fixture can be replaced, and the product on the second fixture can be processed. Replace the product on the first fixture on the list and end reciprocating processing. If only one fixture is placed, only semi-automatic processing can be used. In the standby state, press the number key '1' on the panel to enter the fully automatic working method. When the protection is displayed, the whole machine moves one after another. After repairing, move the machine head to the high position and use the 'single step' key to find For empty positions, press the 'Start' key to process. Otherwise, in the originally processed hole position, pressing the start key will show the phenomenon of heavy holes, which may damage the needle. You must pay attention to the operation, and you should also pay attention to the semi-automatic processing.
semi-automatic
press the 'start' button once to process once. After the product is processed, the machine head is connected at the highest position and works to the starting point. To replace the product, press the 'start' button again, work to the first hole position on the list, and process it again. It can also process from the Nth hole to the final hole. N can be set. After the hole number is input through the keyboard, press on When the hole and the lower hole key work to the hole, make sure that the hole position must have not been processed, and then press the 'start' button to process, otherwise the needle will be damaged, and when the protection is shown, the processing method is the same as that of fully automatic processing.
Fully automatic
After inputting the product data, press the 'Up Hole' or 'Down Hole' button on the automatic test machine screen to end the single-step hole alignment. Find out if the orientation of the hole is wrong, if it is wrong, you can exit and enter the experience modification interface to modify it. After pressing start, the workbench will move continuously until a product program file is completed, so that it can be checked whether the workbench is normal.
Copyright © 2023 Meixin Comb Brush Machinery Co., Ltd. | All Rights Reserved 粤I CP备18042005号-4