Various characteristics of nylon brush roller and its production method_FAQ

The sanding brush roller is abbreviated as the sanding roller. It is configured in the sanding machine to soften the fabric or metal surface. The treated fabric has short and even fluff, and the hand feels fine and soft. It is not easy to produce the straight streaks common in sand skin sanding. Nowadays, there are roughly the following methods for making brush rollers: 1. Direct hair transplantation This is the oldest method, which is to plant abrasive filaments directly on the grinding roller. Although the strength can be very high, the cost of hair transplantation is high, and Partial replacement is not possible, which is an initial reluctant choice. 2. Winding type This is a method of planting wool introduced from abroad. The abrasive wire is made into a metal strip that can be wound, and then wound on a sanding roller. It can be customized according to the length of the sanding roller, but because the abrasive wire is stuck on the metal strip, it will cause the phenomenon of wire drawing (abrasive wire is drawn out), the strength is not high, and only the two ends are fixed after winding, so it is difficult in the middle Make it tight, and if one end is loose, an accident will occur. 3. Although the production process of nylon sleeves is simple, it is also the one with the most problems. The thermal expansion and contraction of nylon will cause the nylon to grow, so that the nylon at the two ends of the roller body will grow out of a sanding roller to withstand the machine; use horse-riding nails for planting The bristles have low strength and are easy to shed hair; the thermal expansion and contraction of nylon will also cause the nylon sleeve to swell and crack and make the entire sanding roller scrap; the strength of nylon is not high, and the planting density cannot be increased. Although many foreign manufacturers also make it, but The most exposed problems are. 4. Aluminum alloy brush roller-The new type of brush roller is the best brush roller. It is made of aluminum alloy barrels and can be customized to any length of brush roller; the high-strength aluminum alloy substrate can make the density of hair planting highest. Moreover, the most cutting-edge hair transplanting technology is used, which does not shed hair, and will not crack and grow like nylon; the roller body can accurately check the dynamic balance. Our factory mainly produces special-shaped brushes for industrial machinery, brush rollers, brush trays, brush belts, stainless steel spring coiled brushes, rubber rollers, and sponge suction rollers. It is widely used in industrial machinery cleaning, polishing, dust removal, rust removal, grinding, cleaning, gluing and conveying. The main applicable industries are: glass industry, leather industry, footwear industry, textile printing and dyeing industry, wood industry, furniture industry, electronics (computer) production industry, printing industry, watch industry, galvanized sheet production industry, food and beverage industry, tobacco Cleaning and cleaning brushes for various special industries such as industrial, carton industry, printing industry, lighting appliance cup washing industry, military industry gun washing, highway cleaning and so on. Based on the tenet of striving for survival by quality and seeking efficiency by products, our factory wholeheartedly serves the majority of users. Welcome to visit: www.mxbrushmachinery.com