The product characteristics and application of spiral wound brush roller_FAQ

Generally speaking, people who have a bit of common sense in the brushing industry know that brush rollers are widely used in production lines such as strip hot-dip galvanizing, steel pickling, and color coating, and even play an irreplaceable role in certain process links. At present, The most widely used in the steel industry is the spiral wound brush. The brush wire generally adopts 0.5mm nylon curved wire or abrasive nylon curved wire. In terms of the life cycle of various brush rollers, spiral wound brush rollers dominate. Spiral-wound brush rollers have several ring-shaped brush blades superimposed and assembled on a rotating shaft. Each ring-shaped brush blade is fastened on a ring-shaped metal sheet along the periphery. In this way, the assembled brush roller forms a gear mesh shape, which can avoid the bias of the brush wire during use. Even if the brush wire is used for a long time and is short, there will be no grinding marks or polishing marks on the surface of the plate, which greatly improves Cleaning quality. After the integral brush roller is assembled, the outer circle of the nylon brush roller can be trimmed and polished as a whole, which can further improve the balance of the brush roller and extend its service life. The spiral wound brush roller is composed of a single-piece brush cover, key, brush roller shaft, and end plate. It is a form of integral brush roller assembly. The single-piece brush cover is made of nylon bristles and the single-piece brush cover is combined , And pressed on the brush roller shaft, fixed by the key and the end plates at both ends, the outer circumference of the nylon bristles is turned integrally. All such brush rollers have the characteristics of simple structure, reasonable design and long service life. This article is from Anhui Meixin Brush Factory www.mxbrushmachinery.com Mr. Xu