The correct use of the brush and needle plate of the scrubber_common problem

I believe that everyone is not unfamiliar with the scrubber. Many friends have personally used it. However, there will still be problems of this kind in the process of using the scrubber. Many of these problems are caused by people who are not familiar with the equipment. Today, I will mainly talk to you about the correct use of the brush plate and needle plate of the scrubber. There are generally two types of cleaning accessories for floor scrubbers, one is that the brush plate can be used directly, and the other is that the needle plate needs to be used with a scouring pad. The brush plate is mainly used for the more wear-resistant ground like cement floor, ceramic tile, marble, etc., while the dial plate is mainly used for the easy-to-damage ground such as epoxy floor. We can choose suitable cleaning accessories according to our needs. Generally, when introducing this kind of problem to the customer, we will follow the other's ground advice, and in the on-site training, we will also inform the user of the scrubber, but there are still some users who can't distinguish how to use it. We once met a customer. His employees reported that they were pushing hard when using the scrubber, and it was difficult to use, and they would skip insurance from time to time. When our after-sales staff came to check, he should have installed it on the dial. The scouring pad used above is placed on the brush plate, which causes the friction to increase and the motor load also increases, so it will be pushed up and re-jumped. This kind of problem seems incredible, but it does happen, so here we still want to emphasize that the scouring pad is used on the needle plate, and the brush plate is used independently.