Steel wire roller introduction_common problem

Steel Wire Roller-Introduction to Steel Wire Roller: What is a wire roller made of thin steel wire, copper-plated steel wire, stainless steel wire and other metal wire materials, wound into a roller called a steel wire roller. The steel wire roller is made by clamping the steel wire on a U-shaped metal strip and then winding In the steel pipe shaft, it can be customized according to the length of the wool roller. The steel wire roller produced is first spliced u200bu200bwith steel pipes. The steel wire brush roller of any length can be customized. After winding on the steel pipe shaft, it is fixed on the metal wire cutter according to the specifications. To repair the garden: During the process of winding the U-shaped steel wire bead, spot welding is performed every few turns to strengthen the fixation. The characteristics of the steel wire roller steel wire roller steel wire roller production main material copper wire roller is composed of steel wire and steel shaft The main steel wire material has 0.1, 0.2, 0.3, 0.4, 0.5, 0.6mm stainless steel wire, copper-plated steel wire, steel shafts have 100-400mm steel pipes, two-end welded shaft heads, steel wire rollers, main uses, steel wire rollers are mainly used in four areas: dustproof, polishing, cleaning, and grinding. The steel wire roller is mainly used to deburr and finely polish the surface of the thrown object. Therefore, the type and characteristics of the steel wire must be determined according to different requirements. If it is a steel plate with strong hardness, the surface needs to be electroplated and polished. The most ideal brush wire should be bronze wire. If it is a general metal material for surface rust and deburring treatment, then the steel wire with better hardness can be used. Steel pickling roller, steel wire brush, metal plate pickling brush, generally used for The equipment for pre-processing and deep processing of sheet metal is the main equipment. www.mxbrushmachinery.com