Spring brush introduction_common problem

Spring brush (bristle brush roller): 1. The spring brush is to embed the brush wire in the galvanized iron or stainless steel bar and wind it into the shape of a spring by the machine to form a new variety of brush roller. This technology is a new method of introducing foreign brush rollers. 2. The spring brush is divided into inner winding spring brush and outer winding spring brush in appearance as shown in the figure below. 3. The spring brush roller is used on a seamless round shaft to maintain a good density with this winding method. Spot welding on the round shaft to form today's spring brush roller with high density of brush filaments and not easy to lose filaments (also called Winding brush roller). 1. The purpose of spring brushes: spring brushes are mainly used in coating, steel (steel pretreatment, steel galvanizing, steel color coating), glass cleaning and other industries. 2. Distinguish by material: The brush wire material determines its purpose. 1. Wire spring brushes are mainly used in steel, coating and other industries. 2. Nylon wire spring brushes are mainly used in industries such as cleaning, polishing of furniture wood, and derusting of color coated rolls. 3. Introduction to the characteristics of the spring brush: 1. The spring brush mainly solves the problem of density that cannot be reached by ordinary brush rollers (brush rollers planted with filaments on plastic or other brush attachments such as nylon). (Note: Because the firmness of the brush filaments should be taken into consideration when planting plastic hairs, the brush filaments must not fall off. The density of the ordinary brush rollers has a maximum limit; to achieve the highest density, the ordinary brush rollers It can't be achieved) 2. Some spring brushes also have a certain gap, which is specially designed considering that the spring brush will fall into the brush wire and cannot be cleaned when the spring brush is working.