Specification and material of snow sweeping brush_faq
by:MX machinery 2022-03-31
The snow sweeping brush roller is also a kind of road sweeping brush. It is a new type of snow removal tool developed in recent years. The brush is installed at the front end of the snow sweeper. Here we introduce the relevant knowledge of the snow sweeping brush roller. The snow sweeping brush roller is composed of a roller core and a brush sheet. The roller core is made of seamless steel pipe welded shaft heads at both ends. Three square tubes are welded on the circumference of the roller body. The square tube specifications are usually 25 or 30. , The square tube takes the role of the fixed brush piece. The size of the round steel pipe and the square steel pipe is determined by the size of the inner hole of the piece brush. One end or both ends of the roller body are punched and tapped with the cover head, and the cover head of the roller body is fixed with screws, which facilitates the installation of the brush and the fastening of the brush. Then put the rivets of the snow sweeping brush on the square steel pipe to fix it, and rotate it in a clockwise direction when setting it, so that the fixed blade brush on each square steel pipe is the same. The bristles of the snow sweeper are made of PP wire + spring steel wire or galvanized steel wire. For ice cubes, full galvanized steel wire is used. For Songxue, full PP wire is used. However, PP wire, PA wire and galvanized steel are used most frequently. Mixing in a ratio of 1:1, because the strength of the full PP wire is not enough, the full galvanized steel wire will be broken and complemented by improper operation. The brush of the snowplow is wear-resistant, does not damage the road surface and has a good snow-sweeping effect. It can sweep the snow for a long time under ultra-low temperature conditions without breaking, and has good elasticity. It effectively protects the urban sanitary environment and meets the needs of municipal efficient snow removal. The size of the snow sweeper can be divided into outer 900 with inner 300, outer 800 with inner 255, outer 660 with inner 205, outer 550 with inner 168, outer 450 with inner 128, etc. It can also be customized according to customer requirements. The snow sweeping brush is fixed on the U-shaped iron ring by the bristles and pressed by a punch press. It is divided into a flat snow sweeping brush and a concave-convex snow sweeping brush (the flat snow sweeping brush is stamped into a concave-convex shape by a mold). Welcome to www.mxbrushmachinery.com