Special information for forming brush roller_FAQ

Anhui Meixin Brush Factory introduces the special brush roller for singeing machine. It uses bristle or nylon and other materials. The roller is made of 45# round steel + injection molding. There are many remaining hairs on the textile fabric. The use of the singeing roller That is to brush out the remaining hairs, and there is an open flame under the brush roller to burn them; the opening roller of the severing machine, the severing roller is made of 45# round steel roller, nylon and other materials. , From the center to the two ends in a herringbone oblique method of planting hairs, the brush roller feeds the cloth into the roll, the effect of the herringbone oblique is to brush the cloth to the two ends to make it straight; the needle plate press wheel, the center is an injection molded body, and the bristles are mostly It is bristles, and its purpose is to press the cloth edge onto the needle plate of the machine through the pressure of the bristles.　　 Glass cleaning machine brush roller, the roller shaft is usually 45# round steel, the bristles are mostly nylon material, acid and alkali resistance. If you need to add acid cleaning glass cleaning line, it is necessary to use all stainless steel brush roller to avoid corrosion, usually use a strip brush machine to make a strip brush and then spirally welded on the roller; suction roller, choose high-density affinity It is made of sponge of water molecules, which has good water absorption performance and fast drying. It is used to quickly absorb all the water droplets on the surface of the glass. Welcome to www.mxbrushmachinery.com