Sanding roller_common problem

The sanding roller (commonly known as carbon sanding roller, carbon fiber sanding roller, etc.) is arranged in the sanding machine to soften the fabric. The treated fabric has short and uniform fluff on the surface, delicate and soft hand feeling, and slight decrease in fabric strength. It is not easy to produce the straight streaks that are common in sand skin. Grinding rollers can also be used in metal and non-metal surface polishing, socks napping and other industries, with a wide range of applications. There are roughly the following methods for making sanding rollers: 1. Direct hair transplantation This is the oldest method, which is to plant abrasive filaments directly on the grinding roller. Although the strength can be very high, the cost of hair transplanting is quite high. And it cannot be partially replaced. 2. Winding type is a method of planting wool introduced from abroad. The abrasive wire is made into a metal strip that can be wound, and then wound on a sanding roller. It can be customized according to the length of the sanding roller, but because the abrasive wire is stuck on the metal strip, it will cause the phenomenon of threading, and the strength is not high. 3. Although nylon can be easily produced, it also has the most problems. The thermal expansion and contraction of nylon will cause the nylon to grow. It is the nylon at the two ends of the roller body that grows out of a sanding roller to withstand the machine; use horse riding Nail planting bristles, the strength is not high, the easiest to shed hair; the thermal expansion and contraction of nylon will also cause the nylon sleeve to expand and crack, making the entire sanding roller scrap; the strength of nylon is not high, and the planting density cannot be increased... 4. Aluminum alloy brush plate-the new type of sanding roller is the best sanding roller in the world today. It is spliced u200bu200bwith 20cm brush plates and can be customized to any length of brush roller; high-strength aluminum alloy substrate can be used The highest density of flocking, and the most cutting-edge flocking technology is used to ensure no hair loss, and will not crack and grow like nylon; the dynamic balance of the roller body is also excellent. Most importantly, this method truly achieves rapid replacement, rapid trimming, and unlimited extension. National Patent Number: 200520014581.0 The above introduces several forms of sanding rollers. Our factory was established in the early 1980s. It is the first manufacturer in this area to design and produce various industrial machinery brush rollers, civilian brushes, sanitation brushes and other brush products. It is widely used for cleaning, decontamination, and decontamination of various machinery. Rust, sanding, polishing, gluing, cleaning, and dust removal. The materials include nylon wire, plastic wire, bristles, wool, ponytail wire, sisal, steel wire, abrasive wire, and brush specifications and materials can be produced according to customer requirements. Our products are guaranteed to be used continuously for more than one year. Customers are welcome to consult and order. Welcome to the official website of Meixin Brush Factory http;//www.mxbrushmachinery.com