- 2 Axis Brush Making Machine
- 2 Axis Brush Drilling And Tufting Machine
- 3 Axis Brush Making Machine
- 3 Axis Brush Drilling And Tufting Machine
- 4 Axis Brush Making Machine
- 4 Axis Brush Drilling And Tufting Machine
- 5 Axis Brush Making Machine
- Industrial Roller Brush And Disc Brush Machines
- Other Machines
Reasons for the defective products of the tufting machine-jiangmen xinhui district meixin comb manufacturing Co., ltd.
First: The copper wire is simply bent
1. The cutting copper part of the tufting machine head is worn out and replaced. 2. The copper cutting knife is worn and replaced. 3. Improper adjustment of the planting head and copper cutting knife, adjust from the beginning. 4. If there is a foreign body on the contact surface of the hair transplanting head and the core of the hair transplanting head, remove and eradicate it. 5. Improper adjustment of the height of the copper cutting knife, adjust it from the beginning; adjust the copper wire too long, shorten the copper wire. 6. The copper wire is of poor quality, such as bent, too wide or too thick, replace the copper wire with a new one.
Second: The length of the copper wire of the tufting machine is different. 1. The copper wire clamp is worn out, or replaced after being polished from the beginning. 2. The copper wire backstop is worn out, and the copper wire backstop is replaced or replaced.
Third: The point of view of the copper wire entering the handle of the brush is wrong when the hair is planted, resulting in that the copper wire cannot jam the bristles or the copper wire simply drops. 1. Copper wire size sheet, please refer to copper wire size sheet. 2. The copper wire adjustment is too short. 3. The distance between the tufting head and the brush handle is too large when tufting, adjust the interval between the front and back. 4. The front end of the tufting needle is worn, flattened or replaced. 5. The front exit piece of the tufting head is worn out, replace the tufting head.
Fourth: The bristles pulling force of the transplanting machine is lacking. 1. The copper wire is too short, adjust the length. 2. The depth of tufting is not allowed, adjust the length of the tufting needle. The length of the bristles is uneven (all), the upper and lower positions of the brush hole are not adjusted properly, adjust the brush handle from the beginning. Improper adjustment of the height of the bristles up and down, the orientation of the bristles, adjust the height of the bristles and the bristles.