Products
- 2 Axis Brush Making Machine
- 2 Axis Brush Drilling And Tufting Machine
- 3 Axis Brush Making Machine
- 3 Axis Brush Drilling And Tufting Machine
- 4 Axis Brush Making Machine
- 4 Axis Brush Drilling And Tufting Machine
- 5 Axis Brush Making Machine
- Industrial Roller Brush And Disc Brush Machines
- Other Machines
new developments in sanding technology.
by:MX machinery
2019-08-25
Multiple-
Task ability, reduced settings-
Over time, it has become easier to produce high-quality end products, and industry experts attribute this result to recent technical updates on the feeder Sander.
Wood and wood products investigated the grinding machinery dealers and manufacturers on new developments in polishing equipment technology.
Consensus: The quality completion of the final product depends on an appropriate equation involving the polished material, the machines and methods used in the sanding, and the time and effort involved in the process.
One question is: \"What are the new developments in equipment technology and how can they help users improve production efficiency?
\"Here are some edit responses from sandingequipment vendors to this issue.
Harold capann, National Sales Manager, Timesavers: \"In Western sanding technology, there are three types of combined planing knife/Sander, feeder track Sander and sealed Sander.
\"The combined planing knife/Sander uses a knife head that follows one, two or more grinding belts.
Knife head in the first bracket: reduced horsepower requirements and grinding costs, and increased feed speed
Speed rates and more accurate tolerances are achieved.
In the past, sticky
Use 36-planning panelgrit abrasives.
This requires a grinding sequence of 60/100/120 to remove scratches.
The surface of today\'s knife head is smooth and takes about 0. 010-0. 012-
Inch stock removed, so 120-
Use a grinder.
\"The recently added fed-through track Sanders is a combined machine that uses broadband sand heads, followed by rail heads, followed by denibbing brush units.
Track Sanders is mainly used to remove scratch patterns from belt sanding and/or stroke sanding.
The second use of this special machine is sealing/painting polishing.
\"The woodworking industry, together with many major machinery manufacturers, is constantly developing new and improved sealing sanding methods.
Sealed sanding can be done by using widebeltsanders, brush machines, hand sanding, rotating brush and by rail sanding.
It has been seen and further developed that denibbing of materials in white wood state by any of the above methods has greatly improved the product before dyeing and sealing.
The surface with proper preparation reduces the amount of human work used in subsequent processes.
Dean Sager, sales manager, Tekna Machinery: \"Computers increase productivity by reducing operator groups
Wrong time and operator.
Save computer programs of all different materials to beent-through Sander, operator group-
The boot time and error are greatly reduced.
No more manual settings
Several differences in running each piece of material on the machine.
It is all handled by calling a single program for a specific material, which is pre-processed
Set everything on the machine.
\"The electronic segmented pads greatly reduce the sand holes of the veneer and lacquer, which in turn greatly improves the operator\'s productivity by reducing operator errors, material rework and material handling.
Scott crissum, Costa and crissum machineryInc.
The problem is always the same.
It seems that the answer for most sand suppliers is always the same: computer control, electronic split board units, etc.
Instead of trying to take the broadband Sander as a whole, however, why not eliminate these problems before they start the operation of the broadband Sander?
\"Manufacturers are beginning to realize that if the panels are fairly flat, if the overall panel tolerances are tighter, they will not only see a significant improvement in the quality of the sanding, but also a significant improvement in other processing operations.
The answer to this question is the core calibration.
\"If the manufacturer is aware of the importance of recalibrating, then there is no additional cost to copy the head on the combined machine.
If the panel is flat, there is no need to copy it.
In short, the tolerance of all machines throughout the manufacturing plant will be greatly improved.
\"The last thing to consider is the final product.
If the panel is processed from the beginning of the operation, the finish will be more uniform, thus helping to produce the best possible finish. \"Stephan W.
Waltman, vice president of sales and marketing and international product manager-
\"As in most areas of the woodworking industry, the use of electronic control technology has made woodworking workers more productive, from simple terminals to controlling belt speed and feed speed, then to the integration technology that can remember the unit --
Upgrade the entire machine by part number or bar code.
By using this electronic aid, the grinding technician can greatly reduce his equipment
Improve time and quality.
Mike Hammer of Sunhill Machinery: \"We are in 15-inch wide-
Belt Sanders with open design, with smaller footprint and smaller power requirements.
Technological progress means [+ or -]0. 001-
Inch accuracy of side to side.
The adjustment of the contact roller hardness means extreme precision when grinding, even for laminated materials with very close tolerances.
\"We believe that keeping pneumatic tracking can provide reliable performance through reliable technology compared to the high service and replacement parts costs associated with electric power
Eye tracking system. Keeping the 15-
Inch sanding machine is simple, there is no table plate and single head, reduce the cost, and the cost is very high
Small shops can buy high quality sanding equipment at a reasonable price.
\"Improvements to the dust removal design, closer to the full head of the throat --
The length of the contact roller means more efficient removal of waste, reduction of dust in the workshop, and a healthier workplace.
\"Chris Deda of Deda company
: \"The grinding beltunits technology used in the past for contour sanders includes rigid design of the grinding rod mechanism on the unit.
The rigidity of the sand cushion Inlet has a significant effect on the edge.
In other words, the pads remain in the same rigid position and do not follow the natural contours of the combustion profile.
Belt changes through the material.
\"Today\'s pad mechanism is more tolerant and more satisfactory.
They can be adjusted according to the outline of the edge.
This produces a smooth rather than a calibration effect on the edge. \"Set-
Until the correct positioning of the grinding plate is obtained, the maximum time on the grinding plate is usually a process of trial and error.
The new forgiving design usually allows the operator to get good sanding work on the first few test pieces.
\"Seat belts can now be used to polish the edges of the cathedral and other shapes.
Where possible and economical, the grinding tape should be used to polish surfaces without complex details.
In the past, most of the grinding on the edge of the shape was done using the grinding disc unit.
But now thanks to the computer
The auxiliary design, the belt unit follows the tour of the panel.
Allen\'s use-
Bradley computers can easily replace parts.
These programs are equipped with a self
Help the operator learn the learning function of using the machine.
\"In the end, reduce or eliminate difficulties --to-
The use of technology or hand polishing will reduce time constraints and labor costs and increase productivity and production capacity.
Doug Armitage, technical sales manager, Force Machinery: \"Wide-
The design of the cross belt sanding machine has had a huge impact on the way the woodworking looks at surface improvement and quality while polishing.
The cost of this technology has dropped to the range of smaller manufacturers, the machine is easy to operate and consistent in uncalibrated materials.
\"In many applications, the traditional Sander has been upgraded, manual and track sanding has been completely eliminated, and the new polishing method can achieve measurable results on the bottom line, there are obvious improvements in quality and consistency.
\"The carpentry I spoke to reported that in order to take advantage of the new machine, they changed the actual function of sanding in production.
It\'s not always easy.
Traditional sanderdesign focuses on the removal of inventory.
The modern polishing Sander is mainly dedicated to providing clear surface quality for the application of modern polishing materials.
This is very different from yesterday\'s design of the resistance standard.
Here is a review of some of the sanding equipment available in the woodworking industry.
For more information, Please circle the corresponding number on the reader service card or consult the 1996 Red Book annual buyer Specification Guide.
Widebelt sanderthe series 500 sharpener planing machine/Sander from grinding engineering and manufacturing.
There is a spiral cut in the first stop.
The device can be used for work that requires dimensional marking and grinding edges
Wood, ribbon board and core material.
Cemco reached an agreement with Don Haney to produce an updated version of Haney cross-
Grain track Sander
There are three widths in the unit (
Of 37, 43 and 52. )
It can be equipped with broadband grinding head and tilt brush head at the same time.
The ratio of available grinding media is more than 60%.
Jubilee series Vega Sander is available from ForceMachinery with programmable terminals that control the feed rate, CPS segmented pads, variable edge pressure, pre-
Selection of work place, hour counter and timer.
Halsty widebelt Sander has 37-in. x 75-in.
Belt, 81/2-in.
Working height, combined head with nine-
Position panel and four-
Speed conveyor belt. The JMB-37B 36-in.
Wide belt sander for Jet equipment and tools has 20-
Hp motor and variable feed speed from 16 fpm to 62 fpm.
It can handle 5 thick workpieces.
Said the company. The 37-in. -
Wide Belt machine of S. J. G. Machinery Inc. features a 5-in. -
Contact roller in diameter, then 3-in. -
Polished table board.
Other features include 75-in. -
Long abra belt, table power lift, 15-
Hp main motor and control variable feed speed. The Model Pro-3000 37-in.
Broadband sanding grinder tools from Woodmaster LimitedSingle functionand three-
Phase Motor with infrared tracking, motor load meter, metal disc brake and variable feed speed. The Lobo A-
3760 broadband Sander has 20-
Hp motor powered for 37-in. by 60-in.
Belt accessible through a full open side door.
Feed table has a 2-
Hp motor with springloaded infeed-outfeedhold-
Lower rollers and six different computers
Controlled speed and anLED indicator for thickness control.
Heesemann MFA8 automatic, multi
Surface Sander for Stiles machineryuses CSD-
Pressure beam technology to control sanding pressure.
The MFA8 can be polished with veneers, paint and foil;
Calibration and polishing of solid wood polishing;
Processing of Cross and longitudinal veneer parts;
Alternate production of small and large series;
Polish the parts with twist and different tolerances, and polish the various shapes from the circle to the rectangle.
Tekna machinery is newly added DMC broadband sanding sanderline is a FINESAND Sander designed to eliminate cross
Granular scratches left by longitudinal broadband Sanders.
The table feed speed of 1 track reaches 30 rpm.
Other features include vacuum cleaners, 52-in.
The table is wide, the Tynex brush and the two track heads at the onemating base.
Sandya 10 RRCS 43-in.
Sander of SCMI comes with a7-in. -
Calibration drum for diameter steel, 7-in.
65 durometer pre-
Tambourine and 7-in.
45 durometer finishing drum with 2 1/2-in.
Polishing board.
Other features include variable feed speed pads, the ability to lift the feed table from the control panel, floating pressure shoes and 1 feet pedals to control the positioning of the table.
SCMI also offers a single board package with electronic segmented pads
Finished quality, no sanding.
Costa & Grissom Machinery offers Costa Model 60 widebeltsander, designed as a production machine for two or three work units.
Model 60 with 103-in.
Pneumatic grinder-
Set for polishing solid wood, veneer and lacquer ware, electronic segmented pad unit, variable feed rate and variable cutting speed. The SDM-15 15-in.
Sunhill, a broadband sanding grinder, provides a mechanism with
The final design enables it to polish up to 30. wide.
The second edition of Themachine has two speed feed speeds, and the main motor has been moved to the inside of the base to reduce the footprint of the machine. The model 252-
71 avers\'s 71 ctb combination bottom and head Sander is designed specifically for processing furniture components, cable doors and face frames, solid wood and panels. The 252-
71 ctb featuresTEFC motor, digital thickness reading, conveyor belt tracking, overthick shut-
Power failure protection function, quite similar
Trak electronic grinding belttracking, adjustable contact drum and dial indicator on the platform, adjustable spring-
The load holds the shoe and the percentage load meter.
In the broadband sanding Boere sanding machine and polishing machine Series T and B fromdankaert Woodworking Machinery Co. , Ltd.
Combine the \"floating bed\" pneumatic plate system with pressed shoes for sanding of veneers.
The system provides an instant reset bed configuration and shoes for thickness calibration operations.
Available features include a top or bottom machine with one to four sanding units per machine, a vacuum feeding table, variable feeding and belt speeds, and electronically controlled segmented Air
Loading polishing platform.
Wilke Machinery Co. , Ltd.
New Bridgewood BWS says
15 features anopen-
High-end design makes this month-in.
Bring up to 30 sand. wideand 6 in.
It was very thick to pass the work twice.
The machine also has 8-in.
Diameter, choice of cushion sand grinding roller, mainU. S. -made motors (5-hp, 1-ph or 7. 5-hp, 3-ph)
The tightness of the pneumatic belt is tracked, and the tread rate is 15. 4 fpm.
Model RB37-in.
Broadband sanding grinder from Powermatic, 37-in. by 60-in.
Sanding belt with 15-hp, 3-ph 230-
Voltage control and magnetic control. The two-
Speed Delivery System (15 fpm; 30 fpm)
By separate 1-hp motor.
\"Air-
The belt oscillation is controlled by the Jet sensor and the diaphragm valve system, which virtually eliminates the traditional tracking problem.
Profile & Edge sander Stemas levp. A. Baby 2000 one-
The double sided edge and profile sand blasting machine provided by Derda is equipped with a belt grinding unit and a polishing/polishing disc.
The machine can be straight sand, outline (cathedral-type)
Door and panel edges and molded.
Delle Vedove offers a profile and edge Sander that can polish a wide range of parts and can be equipped with a wide range of belts, grinding wheels and special units to handle complex shapes.
The 300/Gyro contour Sander from the Fladder system allows for uniform stain penetration, smooth closure of the primer coating and minimal particle lift.
It is available in 52 in. and 39 in. widths.
LTC 4 profile Sander for Makor USA Inc. with 40-
The 200fpm is fast in feeding, and can be used for sand skin, plywood, crushing board and other materials.
It has four grinding heads.
The ES Series edge Sander of Tagliabue in the United States can be used in-single-or double-sided versions.
The maximum workpiece thickness capability of all machines is 100mm, and the feed motor can range from 2 to 4 hp. The P. A. O.
Macc automatic profile Sander from Tech Mark Inc.
Equipped with a material transport system that controls molding alignment, special 100mm-
Wide drive band to ensure uniform speed, with a solid bed plate under the material for supporting the positive pressure of the head and easy-to-adjust guides.
Tecnolegno offers a single optionand double-
Side profile.
Sanders is equipped with a PLC unit to control each worker.
Unique Machine and Tool Company\'s 320 shape and sand system.
Shape the part with its feed-through system and then polish the part.
Variable speed control and multiple stations allow the finish of the grinding with precise requirements.
In addition, the machine is able to polish the arches and shapes.
Voorwood A178 shaping machine/sanding machine through the use of precision shaping machine and Voorwood patented turbo sand system, provided through the contour edgeshaping in one pass
The A178 runs at variable speeds of up to 35 fpm and has tools available in nearly a thousand inventory modes.
You can create a custom profile.
LASM series profile from Atlantic machinery Sanders
Including the 1NR model, there is an optional revolver system that can store up to six different pads for as many profiles as possible.
This system reduces the settings.
It takes only a few seconds between runs to adjust the correct pad to the right position.
Sanders now also has an optional digital reading.
Design and build in USAS.
Ritedgebelt Sanders is in the middle of the offeredin width month. or 6 in. With double
Double-sided grounding steel plate up to 60. standard.
The drive motor with overload protection is up to 5 horsepower and offers a fixed or oscillating template model.
All models feature end tables with contact drums and spindle grinding units, and the bias recliner allows for various angle grinding applications with full belt width utilization.
Heesemann m6 8 from IMA
European carpentry, using a patented CSD system for grinding odd-numbered electronic pressure beam systems
The shape of the workpiece, the longitudinal and transverse particles and the thickness change up to 3/32. without set-up changes.
Standard, Max Products Inc.
The company says its four SuperMax models now own the company\'s SandSmart control, offering 25-in. or 37-in.
Grinding ability of single drum or double drum.
The standard configuration includes tension roller, depth meter, hinge steel cover month-in. vacuum port(s)and a 5-hp motor.
They have their own equipment. cooling drum(s)
Patent
Upfasteners and heavy no-
Feed conveyor to power.
Kundig Sander says its Primo widebelt molding Sander with cnc control can make profiles with a depth of up to 0. 4-
Through the use of windows,
Based on software and a wide range of databases.
Profiledefinition can be downloaded as a file and merged directly with the program.
Other features include precise ball rails, dynamic servo drives for feed and height adjustment, and an independent CNC control console built by industrial computers.
Walter Hempel automatic Sander PC-
5. provided by HenryWiegand.
, Used to polish Oval or flat pieces, such as ashammer handle, flat paint brush handle, etc.
The workpiece is placed into the hopper and is automatically picked up, clamped, and guided along a series of sanding bands installed on the pendulum stand.
Related article: Belt speed based on material supply. . .
Match the machine feed rate and sand size to get the best finish on the hinge of the broadband Sander, depending on the type of material being polished, and the end use of the material.
\"From customers to customers, the best completion is very subjective,\" said Mike Hamer of Sunhill Machinery . \".
\"The biggest advantage of broadband is that the large area of the belt, coupled with beltoscillation, means that the work is overheating and burning when using the fine grille (180-220)
Even in materials with knots or variations in thickness, this is not a problem.
In most cases, experience and material knowledge on the machine is the only reliable guide for the customer to get the best finished product.
\"With this in mind, to achieve the best machine performance in the best possible finish in the final product, it is necessary to understand the materials being polished, the machines being used, sand properties of the Belt and final use of the finished product.
Scott Grisham of Costa Grisham machinery said: \"The bottom line is that there is no \'rule of experience \'. \"
\"The most important thing, however, is left out of the equation: cutting speed.
Actually, not the theory, all the things that are polished need different cutting speeds.
This can also be traced back to what kind of sandpaper the end user uses.
He continued, \"the best and only guideline to follow is: achieving the best possible completion in the broadband sanding sector depends entirely on one thing, that is, the end user, the supplier of broadband sanding sand paper and the supplier of finishing materials.
Only when these four groups work together can we achieve the best results.
Dean Sager, sales manager at Tekna Machinery, agrees, \"it depends on what you polish.
\"When grinding solid wood with 36 grains of sand and calibrating a large amount of wood,\" Sagel said, \"you will move at the slowest feed rate.
When the finish is polished, you use a very high grits of 240 or more, and the table top feed rate will be very high so that the grinding surface will not heat up. \"Harold K.
Kapaun, national sales manager at timeshare explained, \"most broadband Sanders are equipped with a percentage of the motor load meter to monitor the amps used by the main motor.
Experienced operators can judge whether each worn head has removed the correct stock count by watching the percentage load meter.
The percentage load meter is also used as a tool to avoid overloading the given grinding particles, resulting in an immediate load and/or damage to the grinding belt.
Kapaun added: \"It is recommended to achieve the highest grinding belt life and reduce electrical costs where possible (back to back)feed product.
By transporting the material back to toback, the conveyor belt does not see the normal front and rear \"impact\" load caused by the workpiece.
There is a smooth transition from the first to the second.
By reducing the impact load on the conveyor belt and reducing the surge that will occur if the process is not used, the highest possible wear life is achieved with the lowest power consumption.
Kapaun also added, \"it is recommended to skip no more than one grinding particle from widebeltsander\'s first head to the second.
Without skipping more than one grinding particle, the grinding particles below can remove the scratch pattern of the previous grinding particles.
In recent times, Gao
The end customer will not skip any rough grits.
An example is on a typical four-head belt sander, where the sand sequence will be 10/120/150/180 or 120/150/180/220 in order to obtain the best possible sand surface.
\"According to Doug Armitage, technical sales manager of Force MachineryCo.
, \"At a given grinding speed, the feed speed of the wide belt is not related to the finish compared to the material type and the grinding type.
We train operators to run at the highest speed that can be affordable in any particular production situation.
At a lower feed rate, the belt life is affected, and in the case of high inventory disassembly, improper belt loading can cause surface defects. \"Stephan W.
Waltman, vice president of sales and marketing.
StilesMachinery said, \"it\'s hard to give any (specific)guidelines.
Belt speed has a direct relationship to the quality of the finished product, but if cross belts are used, this must be evaluated in a different way.
Regardless of the granularity of the cross belt, the operator must adjust the belt speed to match the overlap required to remove the stock enough.
It always depends on the process parameters and the expected results. \"-J. R.
Task ability, reduced settings-
Over time, it has become easier to produce high-quality end products, and industry experts attribute this result to recent technical updates on the feeder Sander.
Wood and wood products investigated the grinding machinery dealers and manufacturers on new developments in polishing equipment technology.
Consensus: The quality completion of the final product depends on an appropriate equation involving the polished material, the machines and methods used in the sanding, and the time and effort involved in the process.
One question is: \"What are the new developments in equipment technology and how can they help users improve production efficiency?
\"Here are some edit responses from sandingequipment vendors to this issue.
Harold capann, National Sales Manager, Timesavers: \"In Western sanding technology, there are three types of combined planing knife/Sander, feeder track Sander and sealed Sander.
\"The combined planing knife/Sander uses a knife head that follows one, two or more grinding belts.
Knife head in the first bracket: reduced horsepower requirements and grinding costs, and increased feed speed
Speed rates and more accurate tolerances are achieved.
In the past, sticky
Use 36-planning panelgrit abrasives.
This requires a grinding sequence of 60/100/120 to remove scratches.
The surface of today\'s knife head is smooth and takes about 0. 010-0. 012-
Inch stock removed, so 120-
Use a grinder.
\"The recently added fed-through track Sanders is a combined machine that uses broadband sand heads, followed by rail heads, followed by denibbing brush units.
Track Sanders is mainly used to remove scratch patterns from belt sanding and/or stroke sanding.
The second use of this special machine is sealing/painting polishing.
\"The woodworking industry, together with many major machinery manufacturers, is constantly developing new and improved sealing sanding methods.
Sealed sanding can be done by using widebeltsanders, brush machines, hand sanding, rotating brush and by rail sanding.
It has been seen and further developed that denibbing of materials in white wood state by any of the above methods has greatly improved the product before dyeing and sealing.
The surface with proper preparation reduces the amount of human work used in subsequent processes.
Dean Sager, sales manager, Tekna Machinery: \"Computers increase productivity by reducing operator groups
Wrong time and operator.
Save computer programs of all different materials to beent-through Sander, operator group-
The boot time and error are greatly reduced.
No more manual settings
Several differences in running each piece of material on the machine.
It is all handled by calling a single program for a specific material, which is pre-processed
Set everything on the machine.
\"The electronic segmented pads greatly reduce the sand holes of the veneer and lacquer, which in turn greatly improves the operator\'s productivity by reducing operator errors, material rework and material handling.
Scott crissum, Costa and crissum machineryInc.
The problem is always the same.
It seems that the answer for most sand suppliers is always the same: computer control, electronic split board units, etc.
Instead of trying to take the broadband Sander as a whole, however, why not eliminate these problems before they start the operation of the broadband Sander?
\"Manufacturers are beginning to realize that if the panels are fairly flat, if the overall panel tolerances are tighter, they will not only see a significant improvement in the quality of the sanding, but also a significant improvement in other processing operations.
The answer to this question is the core calibration.
\"If the manufacturer is aware of the importance of recalibrating, then there is no additional cost to copy the head on the combined machine.
If the panel is flat, there is no need to copy it.
In short, the tolerance of all machines throughout the manufacturing plant will be greatly improved.
\"The last thing to consider is the final product.
If the panel is processed from the beginning of the operation, the finish will be more uniform, thus helping to produce the best possible finish. \"Stephan W.
Waltman, vice president of sales and marketing and international product manager-
\"As in most areas of the woodworking industry, the use of electronic control technology has made woodworking workers more productive, from simple terminals to controlling belt speed and feed speed, then to the integration technology that can remember the unit --
Upgrade the entire machine by part number or bar code.
By using this electronic aid, the grinding technician can greatly reduce his equipment
Improve time and quality.
Mike Hammer of Sunhill Machinery: \"We are in 15-inch wide-
Belt Sanders with open design, with smaller footprint and smaller power requirements.
Technological progress means [+ or -]0. 001-
Inch accuracy of side to side.
The adjustment of the contact roller hardness means extreme precision when grinding, even for laminated materials with very close tolerances.
\"We believe that keeping pneumatic tracking can provide reliable performance through reliable technology compared to the high service and replacement parts costs associated with electric power
Eye tracking system. Keeping the 15-
Inch sanding machine is simple, there is no table plate and single head, reduce the cost, and the cost is very high
Small shops can buy high quality sanding equipment at a reasonable price.
\"Improvements to the dust removal design, closer to the full head of the throat --
The length of the contact roller means more efficient removal of waste, reduction of dust in the workshop, and a healthier workplace.
\"Chris Deda of Deda company
: \"The grinding beltunits technology used in the past for contour sanders includes rigid design of the grinding rod mechanism on the unit.
The rigidity of the sand cushion Inlet has a significant effect on the edge.
In other words, the pads remain in the same rigid position and do not follow the natural contours of the combustion profile.
Belt changes through the material.
\"Today\'s pad mechanism is more tolerant and more satisfactory.
They can be adjusted according to the outline of the edge.
This produces a smooth rather than a calibration effect on the edge. \"Set-
Until the correct positioning of the grinding plate is obtained, the maximum time on the grinding plate is usually a process of trial and error.
The new forgiving design usually allows the operator to get good sanding work on the first few test pieces.
\"Seat belts can now be used to polish the edges of the cathedral and other shapes.
Where possible and economical, the grinding tape should be used to polish surfaces without complex details.
In the past, most of the grinding on the edge of the shape was done using the grinding disc unit.
But now thanks to the computer
The auxiliary design, the belt unit follows the tour of the panel.
Allen\'s use-
Bradley computers can easily replace parts.
These programs are equipped with a self
Help the operator learn the learning function of using the machine.
\"In the end, reduce or eliminate difficulties --to-
The use of technology or hand polishing will reduce time constraints and labor costs and increase productivity and production capacity.
Doug Armitage, technical sales manager, Force Machinery: \"Wide-
The design of the cross belt sanding machine has had a huge impact on the way the woodworking looks at surface improvement and quality while polishing.
The cost of this technology has dropped to the range of smaller manufacturers, the machine is easy to operate and consistent in uncalibrated materials.
\"In many applications, the traditional Sander has been upgraded, manual and track sanding has been completely eliminated, and the new polishing method can achieve measurable results on the bottom line, there are obvious improvements in quality and consistency.
\"The carpentry I spoke to reported that in order to take advantage of the new machine, they changed the actual function of sanding in production.
It\'s not always easy.
Traditional sanderdesign focuses on the removal of inventory.
The modern polishing Sander is mainly dedicated to providing clear surface quality for the application of modern polishing materials.
This is very different from yesterday\'s design of the resistance standard.
Here is a review of some of the sanding equipment available in the woodworking industry.
For more information, Please circle the corresponding number on the reader service card or consult the 1996 Red Book annual buyer Specification Guide.
Widebelt sanderthe series 500 sharpener planing machine/Sander from grinding engineering and manufacturing.
There is a spiral cut in the first stop.
The device can be used for work that requires dimensional marking and grinding edges
Wood, ribbon board and core material.
Cemco reached an agreement with Don Haney to produce an updated version of Haney cross-
Grain track Sander
There are three widths in the unit (
Of 37, 43 and 52. )
It can be equipped with broadband grinding head and tilt brush head at the same time.
The ratio of available grinding media is more than 60%.
Jubilee series Vega Sander is available from ForceMachinery with programmable terminals that control the feed rate, CPS segmented pads, variable edge pressure, pre-
Selection of work place, hour counter and timer.
Halsty widebelt Sander has 37-in. x 75-in.
Belt, 81/2-in.
Working height, combined head with nine-
Position panel and four-
Speed conveyor belt. The JMB-37B 36-in.
Wide belt sander for Jet equipment and tools has 20-
Hp motor and variable feed speed from 16 fpm to 62 fpm.
It can handle 5 thick workpieces.
Said the company. The 37-in. -
Wide Belt machine of S. J. G. Machinery Inc. features a 5-in. -
Contact roller in diameter, then 3-in. -
Polished table board.
Other features include 75-in. -
Long abra belt, table power lift, 15-
Hp main motor and control variable feed speed. The Model Pro-3000 37-in.
Broadband sanding grinder tools from Woodmaster LimitedSingle functionand three-
Phase Motor with infrared tracking, motor load meter, metal disc brake and variable feed speed. The Lobo A-
3760 broadband Sander has 20-
Hp motor powered for 37-in. by 60-in.
Belt accessible through a full open side door.
Feed table has a 2-
Hp motor with springloaded infeed-outfeedhold-
Lower rollers and six different computers
Controlled speed and anLED indicator for thickness control.
Heesemann MFA8 automatic, multi
Surface Sander for Stiles machineryuses CSD-
Pressure beam technology to control sanding pressure.
The MFA8 can be polished with veneers, paint and foil;
Calibration and polishing of solid wood polishing;
Processing of Cross and longitudinal veneer parts;
Alternate production of small and large series;
Polish the parts with twist and different tolerances, and polish the various shapes from the circle to the rectangle.
Tekna machinery is newly added DMC broadband sanding sanderline is a FINESAND Sander designed to eliminate cross
Granular scratches left by longitudinal broadband Sanders.
The table feed speed of 1 track reaches 30 rpm.
Other features include vacuum cleaners, 52-in.
The table is wide, the Tynex brush and the two track heads at the onemating base.
Sandya 10 RRCS 43-in.
Sander of SCMI comes with a7-in. -
Calibration drum for diameter steel, 7-in.
65 durometer pre-
Tambourine and 7-in.
45 durometer finishing drum with 2 1/2-in.
Polishing board.
Other features include variable feed speed pads, the ability to lift the feed table from the control panel, floating pressure shoes and 1 feet pedals to control the positioning of the table.
SCMI also offers a single board package with electronic segmented pads
Finished quality, no sanding.
Costa & Grissom Machinery offers Costa Model 60 widebeltsander, designed as a production machine for two or three work units.
Model 60 with 103-in.
Pneumatic grinder-
Set for polishing solid wood, veneer and lacquer ware, electronic segmented pad unit, variable feed rate and variable cutting speed. The SDM-15 15-in.
Sunhill, a broadband sanding grinder, provides a mechanism with
The final design enables it to polish up to 30. wide.
The second edition of Themachine has two speed feed speeds, and the main motor has been moved to the inside of the base to reduce the footprint of the machine. The model 252-
71 avers\'s 71 ctb combination bottom and head Sander is designed specifically for processing furniture components, cable doors and face frames, solid wood and panels. The 252-
71 ctb featuresTEFC motor, digital thickness reading, conveyor belt tracking, overthick shut-
Power failure protection function, quite similar
Trak electronic grinding belttracking, adjustable contact drum and dial indicator on the platform, adjustable spring-
The load holds the shoe and the percentage load meter.
In the broadband sanding Boere sanding machine and polishing machine Series T and B fromdankaert Woodworking Machinery Co. , Ltd.
Combine the \"floating bed\" pneumatic plate system with pressed shoes for sanding of veneers.
The system provides an instant reset bed configuration and shoes for thickness calibration operations.
Available features include a top or bottom machine with one to four sanding units per machine, a vacuum feeding table, variable feeding and belt speeds, and electronically controlled segmented Air
Loading polishing platform.
Wilke Machinery Co. , Ltd.
New Bridgewood BWS says
15 features anopen-
High-end design makes this month-in.
Bring up to 30 sand. wideand 6 in.
It was very thick to pass the work twice.
The machine also has 8-in.
Diameter, choice of cushion sand grinding roller, mainU. S. -made motors (5-hp, 1-ph or 7. 5-hp, 3-ph)
The tightness of the pneumatic belt is tracked, and the tread rate is 15. 4 fpm.
Model RB37-in.
Broadband sanding grinder from Powermatic, 37-in. by 60-in.
Sanding belt with 15-hp, 3-ph 230-
Voltage control and magnetic control. The two-
Speed Delivery System (15 fpm; 30 fpm)
By separate 1-hp motor.
\"Air-
The belt oscillation is controlled by the Jet sensor and the diaphragm valve system, which virtually eliminates the traditional tracking problem.
Profile & Edge sander Stemas levp. A. Baby 2000 one-
The double sided edge and profile sand blasting machine provided by Derda is equipped with a belt grinding unit and a polishing/polishing disc.
The machine can be straight sand, outline (cathedral-type)
Door and panel edges and molded.
Delle Vedove offers a profile and edge Sander that can polish a wide range of parts and can be equipped with a wide range of belts, grinding wheels and special units to handle complex shapes.
The 300/Gyro contour Sander from the Fladder system allows for uniform stain penetration, smooth closure of the primer coating and minimal particle lift.
It is available in 52 in. and 39 in. widths.
LTC 4 profile Sander for Makor USA Inc. with 40-
The 200fpm is fast in feeding, and can be used for sand skin, plywood, crushing board and other materials.
It has four grinding heads.
The ES Series edge Sander of Tagliabue in the United States can be used in-single-or double-sided versions.
The maximum workpiece thickness capability of all machines is 100mm, and the feed motor can range from 2 to 4 hp. The P. A. O.
Macc automatic profile Sander from Tech Mark Inc.
Equipped with a material transport system that controls molding alignment, special 100mm-
Wide drive band to ensure uniform speed, with a solid bed plate under the material for supporting the positive pressure of the head and easy-to-adjust guides.
Tecnolegno offers a single optionand double-
Side profile.
Sanders is equipped with a PLC unit to control each worker.
Unique Machine and Tool Company\'s 320 shape and sand system.
Shape the part with its feed-through system and then polish the part.
Variable speed control and multiple stations allow the finish of the grinding with precise requirements.
In addition, the machine is able to polish the arches and shapes.
Voorwood A178 shaping machine/sanding machine through the use of precision shaping machine and Voorwood patented turbo sand system, provided through the contour edgeshaping in one pass
The A178 runs at variable speeds of up to 35 fpm and has tools available in nearly a thousand inventory modes.
You can create a custom profile.
LASM series profile from Atlantic machinery Sanders
Including the 1NR model, there is an optional revolver system that can store up to six different pads for as many profiles as possible.
This system reduces the settings.
It takes only a few seconds between runs to adjust the correct pad to the right position.
Sanders now also has an optional digital reading.
Design and build in USAS.
Ritedgebelt Sanders is in the middle of the offeredin width month. or 6 in. With double
Double-sided grounding steel plate up to 60. standard.
The drive motor with overload protection is up to 5 horsepower and offers a fixed or oscillating template model.
All models feature end tables with contact drums and spindle grinding units, and the bias recliner allows for various angle grinding applications with full belt width utilization.
Heesemann m6 8 from IMA
European carpentry, using a patented CSD system for grinding odd-numbered electronic pressure beam systems
The shape of the workpiece, the longitudinal and transverse particles and the thickness change up to 3/32. without set-up changes.
Standard, Max Products Inc.
The company says its four SuperMax models now own the company\'s SandSmart control, offering 25-in. or 37-in.
Grinding ability of single drum or double drum.
The standard configuration includes tension roller, depth meter, hinge steel cover month-in. vacuum port(s)and a 5-hp motor.
They have their own equipment. cooling drum(s)
Patent
Upfasteners and heavy no-
Feed conveyor to power.
Kundig Sander says its Primo widebelt molding Sander with cnc control can make profiles with a depth of up to 0. 4-
Through the use of windows,
Based on software and a wide range of databases.
Profiledefinition can be downloaded as a file and merged directly with the program.
Other features include precise ball rails, dynamic servo drives for feed and height adjustment, and an independent CNC control console built by industrial computers.
Walter Hempel automatic Sander PC-
5. provided by HenryWiegand.
, Used to polish Oval or flat pieces, such as ashammer handle, flat paint brush handle, etc.
The workpiece is placed into the hopper and is automatically picked up, clamped, and guided along a series of sanding bands installed on the pendulum stand.
Related article: Belt speed based on material supply. . .
Match the machine feed rate and sand size to get the best finish on the hinge of the broadband Sander, depending on the type of material being polished, and the end use of the material.
\"From customers to customers, the best completion is very subjective,\" said Mike Hamer of Sunhill Machinery . \".
\"The biggest advantage of broadband is that the large area of the belt, coupled with beltoscillation, means that the work is overheating and burning when using the fine grille (180-220)
Even in materials with knots or variations in thickness, this is not a problem.
In most cases, experience and material knowledge on the machine is the only reliable guide for the customer to get the best finished product.
\"With this in mind, to achieve the best machine performance in the best possible finish in the final product, it is necessary to understand the materials being polished, the machines being used, sand properties of the Belt and final use of the finished product.
Scott Grisham of Costa Grisham machinery said: \"The bottom line is that there is no \'rule of experience \'. \"
\"The most important thing, however, is left out of the equation: cutting speed.
Actually, not the theory, all the things that are polished need different cutting speeds.
This can also be traced back to what kind of sandpaper the end user uses.
He continued, \"the best and only guideline to follow is: achieving the best possible completion in the broadband sanding sector depends entirely on one thing, that is, the end user, the supplier of broadband sanding sand paper and the supplier of finishing materials.
Only when these four groups work together can we achieve the best results.
Dean Sager, sales manager at Tekna Machinery, agrees, \"it depends on what you polish.
\"When grinding solid wood with 36 grains of sand and calibrating a large amount of wood,\" Sagel said, \"you will move at the slowest feed rate.
When the finish is polished, you use a very high grits of 240 or more, and the table top feed rate will be very high so that the grinding surface will not heat up. \"Harold K.
Kapaun, national sales manager at timeshare explained, \"most broadband Sanders are equipped with a percentage of the motor load meter to monitor the amps used by the main motor.
Experienced operators can judge whether each worn head has removed the correct stock count by watching the percentage load meter.
The percentage load meter is also used as a tool to avoid overloading the given grinding particles, resulting in an immediate load and/or damage to the grinding belt.
Kapaun added: \"It is recommended to achieve the highest grinding belt life and reduce electrical costs where possible (back to back)feed product.
By transporting the material back to toback, the conveyor belt does not see the normal front and rear \"impact\" load caused by the workpiece.
There is a smooth transition from the first to the second.
By reducing the impact load on the conveyor belt and reducing the surge that will occur if the process is not used, the highest possible wear life is achieved with the lowest power consumption.
Kapaun also added, \"it is recommended to skip no more than one grinding particle from widebeltsander\'s first head to the second.
Without skipping more than one grinding particle, the grinding particles below can remove the scratch pattern of the previous grinding particles.
In recent times, Gao
The end customer will not skip any rough grits.
An example is on a typical four-head belt sander, where the sand sequence will be 10/120/150/180 or 120/150/180/220 in order to obtain the best possible sand surface.
\"According to Doug Armitage, technical sales manager of Force MachineryCo.
, \"At a given grinding speed, the feed speed of the wide belt is not related to the finish compared to the material type and the grinding type.
We train operators to run at the highest speed that can be affordable in any particular production situation.
At a lower feed rate, the belt life is affected, and in the case of high inventory disassembly, improper belt loading can cause surface defects. \"Stephan W.
Waltman, vice president of sales and marketing.
StilesMachinery said, \"it\'s hard to give any (specific)guidelines.
Belt speed has a direct relationship to the quality of the finished product, but if cross belts are used, this must be evaluated in a different way.
Regardless of the granularity of the cross belt, the operator must adjust the belt speed to match the overlap required to remove the stock enough.
It always depends on the process parameters and the expected results. \"-J. R.
Custom message