loading

Professional Brush Making Machine Manufacturer since 1988.CHINA

Maintenance frequency of hair transplanter/high-speed hair transplanter

by:MX machinery      2021-04-27

1. Purpose:

To ensure the normal operation of the machine and reduce the occurrence of failures. Maintain the high performance, service life, safe operation of the machine and shorten the downtime caused by failure. Carry out regular maintenance work on the machine.

2. Maintenance frequency and maintenance items:

Maintenance is divided into daily, monthly, quarterly, and yearly. Part of the maintenance is carried out when the machine is adjusted and the die is changed.

Daily inspection

1. Clean the bristles and dust inside the front and rear base of the tufting machine;

2. Clean the entire base of the tufting machine with oil and dirt;

3. Clean the surface of the equipment;

4. Add a small amount of 68# lubricant to the cam;

5. Add a small amount of 68# lubricating oil to the ring head of the supporting hair cutter, the bearing of the eccentric wheel connecting rod and the large needle bar;

6. Add a small amount of 68# lubricating oil;

7. Check whether the hair transplanting needle is in good condition and repair and replace it;

8. Check whether the electric eye (send copper electric eye for hair transplanting electric eye) is sensitive and repair;

p>

Monthly inspection

1 Check whether the lubrication system supply of the machine is normal and whether there is oil leakage and repair;

2 Check whether the air pipe of the machine is leaking and repair it;

3 Check whether the clamp spring is good and repair it;

4 Check and repair the copper delivery mechanism;

5 Check whether the switch button on the panel is normal;

6 Overhaul the radiator and filter of the electrical box;

Check every quarter

1. Check whether each cam roller is running well and overhaul it;

2. Check that the 90-degree positioning cylinder and positioning guide post are in good condition and overhaul it;

3. Check whether the tufting cam, copper feeding cam, copper cutting cam and each bearing are in good condition and overhaul;

4. Check whether the rocker arm slider is worn or loose; adjust or replace if it is abnormal;

5. Check whether the tufting head (large needle bar) is loose or jammed;

6. Check whether the link head rod and eccentric wheel bearing of the tufting cutter are in good condition; adjust or Replace;

Inspect every year

1. Check whether the turbine and worm are worn or loose and adjust Replace;

2. Check whether the tufting platform (handle head) guide post and bearing are loose; adjust or replace when abnormal

3. Check whether the electric cabinet wires are scattered and organize them ;

3. Daily maintenance requirements and methods of the tufting machine:

3.1 Cleaning, maintenance and inspection of the tufting machine;

(1) Clean with a broom every shift Brush the hair transplanting machine base;

(2) Clean the front and back machine bases with a rag every shift;

(3) Clean the hair transplanting head and the copper cutter every 4 hours when transplanting aluminum wire .

3.2 Lubrication maintenance and inspection of tufting machine:

(1) Cam lubrication: Use a small oil tank to add a small amount of 68# lubricating oil;

(2) Add a small amount of 68# to the small oil tank for connecting the bearing of the eccentric wheel connecting rod and the large needle bar. Lubricating oil;

(3) Add a small amount of 68#lubricating oil to each wire diameter track of the computer;

3.3 Maintenance and inspection of hair transplanting needles:

(1) After stopping the machine, loosen the screws of the crochet seat with an open-end wrench button screw;

(2) Take out the crochet needles and bring out the hair transplanting needles;

(3) Check whether the tufting needle is bent and whether the tufting head is flat or missing corners;

(4) Replace the tufting needle with a new one.

3.4 Maintenance and inspection of electric eye:

(1) Check the application of each tufting machine Whether the part of the induction sensor is missing;

(2) Whether the warning light of the induction sensor is in working condition: on;

(3) Check the sensitivity of the induction sensor, when the hair transplant is in an abnormal state , Whether it can sense the warning, and the machine will stop when the machine fails;

(4) Check the induction sensor once a day;

3.5 Maintenance and inspection of the copper delivery mechanism:

(1) Check whether the elasticity of the anti-skid shrapnel is fatigued; lightly press the shrapnel with your hand to test whether it rebounds;

(2) The anti-skid block is worn, try on If the copper wire passes through the anti-skid block, pull the copper wire backwards to check whether the copper wire can be pulled backwards; if the copper wire can be pulled backwards, it needs to be repaired and replaced in time;

(3) Copper clamping device, Try to pass the copper wire through the copper upper and lower clamping blocks, turn the flywheel by hand, withdraw the tufting head, adjust the copper clamping device, pull the copper wire backwards forcefully, and check whether the copper wire can be pulled back; if the copper wire can be pulled back, you need to Timely maintenance and replacement;

For more information and trends about the tufting machine, please log in to the Taifenglai tufting machine: http ://www.gd-tfl.com/product/show_product.php?idu003d53

Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: