Meixin Comb Brush Machinery
A leader in this industry ,specializing in brush making machine line for more than 14 years.
1. In order to ensure the normal operation of the tufting machine, reduce the occurrence of failures. Maintain the high performance, service life, safe operation of the machine and shorten the downtime caused by the failure. Perform regular maintenance on the machine.
2. Maintenance frequency and maintenance items: Maintenance is divided into daily, monthly, quarterly, and yearly. Part of the maintenance is carried out when the machine is adjusted and the die is changed.
Daily inspection:
1. Clean the bristles and dust inside the base of the hair transplanter;
2. Remove the oil and dirt on the front and rear of the hair transplanter. Dirt;
3, clean the surface of the equipment;
4, drop a small amount of 68 lubricant on the cam;
5, on the head of the epilation knife, and eccentric Drop a small amount of 68 lubricating oil on the connecting rod bearing of the wheel connecting rod and the large needle bar;
6. Drop a small amount of 68 lubricating oil on each wire diameter track of the computer;
7. Check the hair Check whether the needle is in good condition and repair and replace it;
8. Check whether the electric eye is sensitive and repair it;
Picture of hair transplanter
Check monthly :
1. Check whether the lubrication system supply of the machine is normal and whether it is leaking oil and repair it;
2. Check whether the air pipe of the machine is leaking and repair it;
3 , Check whether the clamp spring is in good condition and overhaul;
4. Check and repair the copper delivery mechanism;
5. Check whether the panel switch button is normal;
6, Overhaul the radiator and filter of the electrical box;
Product picture: p7 three-axis code nailing and tufting machine S1345
Inspection every season:
1. Check whether each cam roller is running well and overhaul it;
2. Check whether the 90-degree positioning cylinder and positioning guide post are in good condition and overhaul it;
3. Check Straight hair cam, copper feeding cam, copper cutting cam and each bearing are in good condition and repaired;
4. Check whether the rocker arm slider is loose; adjust or replace if it is abnormal;
5. Check whether the tufting head is loose or tight;
6. Check whether the connecting rod ring head rod and eccentric wheel bearing of the hair support knife are in good condition, and adjust or replace if abnormal
Copyright © 2023 Meixin Comb Brush Machinery Co., Ltd. | All Rights Reserved 粤I CP备18042005号-4