Maintenance and maintenance methods of hair planting machine

1. In order to ensure the normal operation of the tufting machine and reduce failures. Maintain machinery performance, longevity, safe operation and reduced downtime due to failures. Carry out regular maintenance on the machine.

2. Maintenance frequency and maintenance items: Maintenance is divided into daily, monthly, quarterly and annual. Part of the maintenance is carried out when the machine is adjusted and the mold is changed.

Daily check:

1. Clean the bristle dust in the front and rear bases of the tufting machine;

2. Remove the oil and dirt on the front and rear of the tufting machine base;

3. Clean the surface of the equipment;

4. Drop a small amount of 68 lubricating oil on the cam;

5. Drop a small amount of 68 lubricating oil on the head of the hair removal knife ring, the eccentric wheel connecting rod bearing and the large needle bar connecting bearing;

6. Drop a small amount of 68 lubricating oil on each wire diameter track of the computer machine;

7. Check whether the wool needle is in good condition and repair and replace it;

8. Check whether the electric eye is sensitive and overhaul;



Tufting machine pictures

Check monthly:

1. Check whether the supply of the lubrication system of the machine is normal and whether there is oil leakage and overhaul;

2. Check whether the air pipe of the machine is leaking and repair it;

3. Check whether the clamp spring is in good condition and overhaul;

4. Check and overhaul the copper feeding mechanism;

5. Check whether the switch button on the panel is normal;

6. Overhaul the radiator and filter screen of the electrical box;



Product picture: p7 three-axis code nail tufting machine S1345

Check quarterly:

1. Check whether the cam rollers are running well and overhaul them;

2. Check whether the 90-degree positioning cylinder and positioning guide column are in good condition and overhaul;

3. Check whether the straight hair cam, copper feeding cam, copper cutting cam and each bearing are in good condition and overhaul;

4. Check whether the slider of the rocker arm is loose; if abnormal, adjust or replace it;

5. Check whether the hair planting head is loose or clamped;

6. Check whether the first rod of the connecting rod ring and the bearing of the eccentric wheel are in good condition, and adjust or replace them if they are abnormal