Introduction to the application of brush roller_common problem

The main application scope of the brush roller is in four aspects: dustproof, polishing, cleaning, grinding 1. The main purpose of dust removal brushes and dustproof brushes is to install at the inlet and outlet of industrial equipment, assembly lines, doors and windows, etc., to prevent Dust penetrates through these gaps and pollutes equipment and products. Therefore, the brush wire is required to have high elasticity, the surface of the brush wire is lubricated, and it has antistatic function. 2. The polishing brush is mainly used to deburr and finely polish the surface of the thrown object. Therefore, the type and characteristics of the brush wire must be determined according to different requirements. If it is a steel plate with strong hardness, the surface needs to be electroplated and polished. Yes, the most ideal brush wire should be bronze wire. If it is a general metal material for surface derusting and deburring, then steel wire with better hardness can be used; 3. The cleaning brush is the most commonly used industrial roller brush. It is generally used for the cleaning of fruits and vegetables in the deep processing of agricultural and sideline products and general cleaning and dust removal in the industry. The requirements for the brush wire should be good wear resistance, high elasticity and corrosion and aging resistance. It is not easy to deform if it is brushed. The performance of the wire is not good. When the object is placed in a certain position for a long time, the brush roller will appear grooves, which will destroy the use function of the roller brush, and even cause the entire brush roller to be scrapped; 4. Less use of abrasive brushes Generally, industrial grinding will be done directly with abrasive tools such as grinding wheels. These are not within the scope of industrial brushes, but for the textile industry grinding treatment, it is necessary to use the abrasive wire brush roller containing silicon carbide. The mesh number (density) of silicon carbide should be adjusted appropriately with the strength of the fabric to be abraded and the effect to be abraded.