If you want to buy a belt brush, you must understand the characteristics of the belt brush_FAQ

The belt brush can be regarded as a kind of pure hand-made brush variety, and it is not an exaggeration to say that it is a special-shaped brush. Belt brush-The way the belt brush is made is 　　, after punching holes on the belt, fold the brush filaments in half and thread them on the belt with nylon thread, and then trim the bristles. Because of the softness of the belt, its manufacturing process seems simple, but it is really troublesome to make, especially the planting stage, which is done by experienced employees alone. At present, there is no high-quality equipment for mass production in China. General machinery cannot be operated at all. First, after punching holes on the belt, fold the bristles in half and thread them on the belt with nylon thread, and then trim the bristles. Belt brush-The application of belt brush 　　 is to be used in special production lines to transport products through belt brushes or to remove dust from products; wood industry, machinery manufacturing, food industry, sanitation industry, hardware industry, etc. Some belt brushes are not only used in industrial production, but a small amount of them are turned into handicrafts and enter the field of collection. Belt brush-the characteristics of the belt brush. At present, because the domestic belt brush is made by hand, the nylon thread used for stringing will inevitably be exposed on the back, but there is no need to worry about the nylon thread used for stringing will be broken. Usually this kind of nylon used for stringing The quality of the line is similar to that of a fishing line, which is very tough and abrasion resistant. There are two types of belts: long strip and ring. The color is gray, red, green, etc., and the width depends on different equipment. The hair length on the belt brush is also controllable, and its length can be set when used in different equipment production.