- 2 Axis Brush Making Machine
- 2 Axis Brush Drilling And Tufting Machine
- 3 Axis Brush Making Machine
- 3 Axis Brush Drilling And Tufting Machine
- 4 Axis Brush Making Machine
- 4 Axis Brush Drilling And Tufting Machine
- 5 Axis Brush Making Machine
- Industrial Roller Brush And Disc Brush Machines
- Other Machines
How to use hair transplanting machine-Jiangmen Xinhui District Meixin Brush Manufacturing Co., Ltd.
1. One end of the voltage stabilizer 200V AC is provided to the 100kV transformer transformer. One end is grounded, and the other end is connected to the screen inside the box.
2, put the bucket containing the sutra and the glue in the mixing bucket, and then tighten the lid of the bucket, then connect the air source and the spray gun, and then open Air source, the electric fan in the mixing bucket stirs the glue evenly.
3. Put the plastic parts that need to be flocked into the glue mold, then put it into the air extraction box, open the spray box, spray a lot of glue on the plastic parts, and then Take the glue out of the glue mold and put it on the hanging stick.
4. Put the wooden stick into the tufting box, step on the switch to connect the power supply, so that the screen will attract the fluff under the high voltage of static electricity. Then turn the part that needs to be flocked downwards, and constantly swing against the fluff, so that the fluff inside can reach an even level for a while and adequately absorb the rubber parts.
5. Put the glue that has been planted together with the wooden stick into the furnace, and dry the glue.
6. Take the wooden stick out of the stove, and then take out the plastic part from the stick and put it away. After the plastic part cools to room temperature, the surface of the flocking is initially cleaned.