how to make a cute music box for your little boy or girl

If you are creative and want to do something special for your little boy or girl, a lovely music box will definitely bring them a smile and create a memory that can last a lifetime!
Here are some interesting \"whistle-blowing when you work\" instructions, if you wish, from Sharon gansk\'s book \"making wonderful music boxes\".
\"Materials required for the base, including music box accessories: wooden trunk9\" wide X 5 1/2 \"deep x 5\" high 18 note key-
Wind Music activity turntable, 1 \"key extension, 1/2\" 4 wooden clocks, 1 \"music box decorative accessories with sandpaper wood sealer: Lego building blocks series, 5 \"x 5 1/2\" border template, 1 1/2 \"-
Wide designAcrylic paint color: brush paint brush paper with building blocks Lego blocksbluegredylowadheves and spray sealing machine: industrial strength glueStencil, sticky, or tapeGloss spray sealerTools and makeup brush: brush paint brush paper with 1/4 \"drill, step by step assemble sponge brush paint instructions step by step: Polish wooden suitcase and lid of music box with sandpaper.
Next, follow the manufacturer\'s instructions and apply the wood sealer to the trunk and lid using the old brush.
Allow complete drying.
Step 2: Use a brush and paint the side of the suitcase with a yellow acrylic paint.
Next, apply the cover and bottom in blue and the bell in red.
Step 3: center the border Template between the top and bottom of one side of the trunk using a template, adhesive or adhesive tape.
Using a printed sponge brush, sponge templates with green, red and blue acrylic paint.
Dip the small edges of the sponge brush into a green acrylic paint and print on one side at a time.
Apply on paper towels.
Then, the light sponge is green one area at a time, be careful not to paint the unwanted area.
Allow complete drying.
Next, you will be careful again with enough coats to sponge in the green area to completely cover them --
Don\'t apply paint too hard, otherwise it will run under the template.
Do not remove the template.
Repeat the process in red and blue.
When drying, remove the template and sponge the remaining three edges in the same way.
Allow complete drying.
Spray the trunk, lid and Bell with a gloss seal.
Step 4: drill a 1/4 hole in front of the center of the suitcase.
Step 5: Use industrial strong glue to glue together several Lego blocks to make a winding knob.
Lego wound knob back glue turntable.
Step 6: glue the music action in the suitcase to ensure the winding
The key shaft is centered in the hole. Remove the lid.
Glue the 5 \"x 5 1/2\" yellow Lego blocks to the top of the lid to make sure it is centered.
Pour the suitcase over and glue a bell in the corner at the bottom of the case to support the leg. Allow to dry.
Step 7: wrap the turntable around the key extender. Wind the key-
Extender on winding key-shaft.
The turntable is the key to winding.
Use the remaining Lego blocks to create whatever you want.
You can then take the creation apart, or you can create something new!
It would be fun to make a music box for your child.
All it needs is a willingness to try.
From today on, create a memory that can last a lifetime!