How to maintain a fully automatic computer tufting machine

How to maintain the automatic computer tufting machine

The automatic computer tufting machine It is more convenient to use, but many people don’t know how to maintain it. The following is a simple list of nine points that we usually pay attention to: 1) The operator must often add lubricating oil to the moving parts of the hair transplanter to reduce Wear between machinery. 2) The operator should regularly check whether the screws are loose, and if so, they must be tightened in time. 3) Keep the guide rail and screw rod clean at all times to prevent debris from adhering to the guide rail or screw rod, thereby affecting the accuracy of machine positioning. 4) Ensure that the electric box works in a ventilated environment, avoid humid or high temperature environments, and prevent the electric box from violent vibration. 5) The electric box cannot work in a strong electromagnetic field environment, otherwise uncontrolled situations may occur. 6) The input power wiring must be correct (red, blue, and yellow wires are respectively connected to 380V three-phase wire, green wire is connected to neutral wire, yellow-green phase wire is grounded), pin numbers: 1, 2, 3 are 380V phase wires, 4 Zero wire, 5 ground wire. To be stable, the working voltage must be maintained at AC380±10V, because if a high voltage is used, it may cause the electronic components to burn out. 7) It is forbidden to hit the touch screen with hard objects. This will cause the sensitivity of the screen to decrease, or even break the glass screen in severe cases. 8) It is forbidden to pull the cable too strongly. 9) There is high voltage in the electric box. When a fault occurs, non-professionals should not disassemble it to prevent electric shock or destroy system data.