Stability is the key to success. Some machine shops find titanium difficult to machine effectively, but this view does not represent the development trend of modern machining methods and tools. Some of the reason it's hard is that titanium machining is a new technology with little learning experience. In addition, the difficulty is often related to expectations and operator experience, especially as some people have become accustomed to machining materials such as cast iron or low-alloy steels, which generally have low machining needs. In comparison, the same tool and the same speed cannot be used for machining titanium, and the life of the tool is different. Even compared with some stainless steels, the difficulty of machining titanium is still much higher. It is necessary to adopt different cutting speeds and feeds as well as certain preventive measures to process titanium metal. Originally, compared with most materials, titanium metal is also a completely directly machinable material. As long as the titanium workpiece is stable, the clamping is strong, the machine tool selection is accurate, the power is suitable, the working conditions are good, and the BT50 spindle with short tool overhang is equipped, all questions will be easily resolved. However, in practical milling, the conditions required for titanium processing are not easy to satisfy, because ideal stable conditions are not always available. In addition, many titanium parts are cluttered in shape and may include many fine or deep cavities, thin walls, bevels, and thin sockets. To successfully machine a part like this, it takes a lot of work. Most machining companies stay away from titanium alloys, because titanium alloys are really difficult to machine. If the right tool is selected and used correctly, and the machine tool and equipment are optimized to the best condition according to the titanium machining needs, titanium alloy machining can completely achieve satisfactory high performance and complete results. Compared with most other metal materials processing, titanium processing is not only more demanding, but also more restrictive. This is because the metallurgical properties and material characteristics of titanium alloys may have a serious impact on the cutting action and the material itself. Various characteristics of titanium make it a powerful part material, but many of them also affect its machinability. Titanium has an excellent strength-to-weight ratio and is typically only 60% denser than steel. Titanium has a lower modulus of elasticity than steel, making it harder and more flexible, and its corrosion resistance is better than stainless steel. These characteristics mean that titanium will generate higher and more concentrated cutting forces during processing. It is easy to vibrate and cause tremors when cutting; it is also easy to respond to the cutting tool material when cutting, and then aggravate the crater wear. In addition, its thermal conductivity is poor, and since the heat is mainly concentrated in the cutting area, the tool for machining titanium must have high thermal hardness. For more high-speed hair planting machine product information, please continue to pay attention to us! Previous：Solution of high-speed hair transplanting machine/hair transplanting machine toothbrush hair transplanting machine systemNext：Working principle and structure of hair transplanting machine
