Flocking machine-electrostatic flocking (velvet) printing process operation requirements

1. Electrostatic flocking (flocking) is a relatively complicated process in printing, and all aspects of operation preparation must meet certain requirements. 1. Choose excellent flocking (flocking) pulp. Excellent electrostatic flocking (flocking) pulp plays a very important part in the flocking process. Fuli Environmental Protection (829) flocking (flocking) pulp has excellent performance, firmness, Features such as soft hand feeling and easy operation. 2. A suitable electrostatic tufting machine is required. The power output of the tufting machine must be debugged on-site. The quality of a tufting machine directly affects the premise of the tufting process. 3. High-quality fluff A: Purchasing high-quality fluff requires scientific selection (how to judge whether the fluff will fade), etc. There are several types of fluff, and there are different lengths, so you need to purchase them appropriately. B: The fluff changes under the change of the weather. Whether the fluff meets the dry and wet requirements during operation, also needs to be adjusted according to the current state, whether it needs to be dried, whether it is humidified, and prepare for the process of flocking. This article comes from Foshan Taifenglai Brush Making Machine Machinery Factory: www.gd-tfl.com 2. Correct process flow 1. Reasonable application of flocking (flock) pulp plays an important role in flocking process, first of all in flocking (flock) When the slurry is used, add a certain amount of Fuli (808) auxiliary (1.5%-2%) or add 1:1 water to mix and stir the auxiliary, and then add it to the slurry and stir evenly. The prepared slurry must be used immediately and cannot be placed Too long time (within 8 hours), otherwise cross-linking will occur under normal temperature and affect the use. This is a matter to be paid attention to in operation. If the flocking pulp is too thick during printing, it can be diluted with an appropriate amount of water to help benign operation. 2. It is recommended to use mesh 800 mesh (80 mesh) for plate making and screen printing: pay attention to the time between the last printing of flocking (flocking) pulp and the flocking operation, and must not be separated by 1 minute. The number of printing depends on the relevant fabric. , Time and other factors. 3. The cloth will be dried out naturally, and it can be washed with 60℃ ordinary water after 24 hours. If the customer requires strict quality, it must be baked at 160°C for 10-60 seconds. Of course, the baking temperature and time also need to be adjusted according to the relevant fabrics and requirements. 4. The final process of planting the fabric to clean the tail. After using the suction machine to suck the wool, the remaining part of the fabric is glued with adhesive paper to ship the finished product.