Dishwasher Brush-Cup Washer Brush_FAQ

Water brush dishwasher includes: motor, rotating wheel, belt, box, rotating shaft, brush wheel, grates, spray pipe, ray disinfection tube, water inlet valve, water outlet valve, washing liquid container, bristles, drain valve . The upper and lower structures in the box body are equipped with several rows of rotating shafts horizontally installed on the box body and several layers of upper and lower structures are installed horizontally on the box body. The upper part of the box body is equipped with a water spray tube and a ray disinfection tube. The motor drives the rotating shaft to rotate through the rotating wheel, thereby driving the brush wheel to rotate, achieving the purpose of washing dishes. Using this electric brush dishwasher saves labor and energy, and is a good helper for families and restaurants. The anti-tilting structure includes a housing with a washing tank inside; a counterweight attached to the back of the housing, and the counterweight has a space that can prevent the dishwasher from tilting forward and store a certain amount of washing water. The front fall prevention structure of the dishwasher has the effect of preventing the dishwasher from falling forward when the upper frame or the lower frame of the dishwasher is pulled forward. It also has an air brake function, which cools the internal cooling device of the dishwasher after drying. The lower end of the detergent container is inclined and contracted, and finally is connected with the discharge channel, and a funnel is installed under the container. There is a loading port on the upper left side of the container. The top of the container is equipped with a top cover. In the center of the top cover, a drum extends downward into the container. The drum is equipped with a spring. The upper part of the valve stem is equipped with a pinion; It is equipped with a thorn, and the bottom end is equipped with a spool. An electromagnet is installed on the top cover, its armature is pressed on the pinion gear, a motor is installed beside the pinion gear, the large gear on the rotating shaft meshes with the pinion gear, and a vibration source is installed on the right side of the container. When in use, the electromagnet, the motor and the vibration source are energized, the valve core moves downward to open the discharge channel, and the detergent flows out from the discharge channel with the help of the vibration source, and then drains from the funnel to the inner box of the dishwasher. Welcome to www.mxbrushmachinery.com