Deburring brush_common problem

In sheet metal processing, the intensive processing of processing equipment, sheet metal forming, micro-bending, deburring after punching, and the disposal of sharp cross-sections and burnt parts during laser processing have become the topics of discussion. A new type of brush type deburring machine, using the method of 'relying on brush roller rotation for cutting' to 'relying on brush roller rotation to eliminate burrs' successfully developed and retracted a functionally stable deburring machine. Through the use of two brush rollers to roll in multiple directions, the burr elimination of all areas of the workpiece is completed and the quality of the processed workpiece is improved. Moreover, in this way, the burrs and sharp corners can be steadily eliminated when disposing of ordinary steel plates and stainless steels. Does not scratch the surface of the workpiece.　　 can correspond to all shapes of the workpiece stamping, forming, laser cutting parts; all shapes can be corresponding, sharp corners and small R trimming; workpiece deformation and secondary processing burrs will not occur. When disposing of burrs, minimize the scratches on the surface of the workpiece; minimize the scratches on the surface of the workpiece, and the steel plate and the coated workpiece can be processed; small workpieces and non-magnetic materials can also be processed, and the workpiece can be transported It adopts the method of adsorption so that small workpieces and non-magnetic objects can also be processed. The workpiece width is 1000mm and the height is 80mm. The workpiece width is 1000mm, which expands the processing object; according to the burr type, there are three types of brushes, from the hard burr burned in laser cutting to the punched one The softer bristles correspond to three different types of bristles. Welcome to www.mxbrushmachinery.com