Daily, monthly, and quarterly inspection items of hair planting machine-Jiangmen Xinhui District Meixin Brush Manufacturing Co., Ltd.

　　Day check:

　　1. The brush dust in the front and rear frame of the tufting machine should be removed;

　　2 , The oil and dirt on the front and back of the tufting machine base should be cleaned;

　　3, the appearance of the setting must be kept clean;

　　4, drop a small amount of 68 smooth oil on the cam ;

　　5. Drop a small amount of 68 smooth oil on the hair removal knife ring head, the cam bearing and the large needle bar;

　　6. Drop a small amount of the wire diameter trajectory of the computer machine 68 smooth oil;

　　7, check whether the needle (hair transplanting needle) is defective and need repair or replacement;

　　8, check whether the electric eye equipment is agile and check;

　　Monthly check:

　　1. Check whether the smooth system supply of the machine is normal and whether there is oil leakage and check;

　　2, check whether the air pipe is leaking and check ；

　　3. Check whether the clamp spring is outstanding and repair it;

　　4. Check the copper sending organization and check;

　　5. Check whether the panel switch button is normal ;

　　6. Inspect the radiator and filter of the electrical box;

　　Seasonal check:

　　1. Check whether each cam roller is running well and check it ;

　　2, check whether the 90-degree positioning cylinder and positioning guide post are exquisite and check;

　　3, check whether the straight hair cam, the copper feeding cam, the copper cutting cam and the bearings are exquisite And check;

　　4, check whether the rocker arm slider is loose; hold a mediation at ten minutes and probably exchange;

　　5, check whether the tufting head is loose or jammed;

　　6. Check if the connecting rod ring head rod and eccentric wheel bearing of the burr cutter are outstanding, adjust or replace if abnormal

　　7. Check whether the electric box wires are scattered and clean up